Looking to lift Gen 2 any suggestions

Looking to lift my 08 toyota tacoma don't want anything really big and out there just want enough to go throw the backwoods and down by the river any suggestions on that wheels, tires and brand of lift kits

 

Probably stick with a 3" lift maximum for what you described. Avoid spacers and blocks.

Wheels either your stock wheels + wheel spacers or new wheels with a backspace of 4.5" or less (helps with clearance)

Tires really just need more info on what terrain ect.. But probably a 33" tire if you don't mind a little plastic trimming

 

Would 6 inch be to much with 37s it's rocky terrain with streams and mature woods mostly thick mud with rocks everywhere

 

Are you trolling? Your 1st post said " don't want anything big" and then you throw out 6" w/37's??

 

I mean I don't want a 8 to 12 inche lift

 

(THIS)

 

Ok so don't buy a Bulletproof 12" lift haha

You have to ask yourself if you want a drop bracket, which means cutting out part of your cross member (no turning back unless you have a pre runner, in which case you want new spindles for that large of a lift not a DB)

 

the picture you show looks like a 3" lift...which would be just fine for what you are looking for, tires can be 285's with no trimming needed, based on what wheels you use.