1st gen skids by RAT Products! I'm back! Cheapest ever!

any issues with the transfer case plate fitting on a 1st gent with BAMF bolt on sliders?

 

I'm not sure. I've never had any complaints.

 

You want skid plates and a bumper? The skids would be 3/16" I assume, not 3/8"? I don't have 3/8".

 

Can you give a measurement where the transfer case skid needs to be mounted to the frame? Interested in a 3 piece set, but I made my own sliders, and they're welded onto the frame with an L bracket. Hoping it will all work together! I will take a picture to illustrate what I'm talking about, if you want a reference to where I need the measurement.

 

I made up my mind. Put me down for the 3 piece set in 1/8".

 

It would mount to the frame from 4-15" behind the center of the transmission crossmember. Something like that.

Got it!

 

The slider plate is about 12.5" back from the crossmember. Could you take a measurement when you get a chance to see how far the rear side is? Would love to get on this GB for a full set. If it doesn't fit, maybe I'll just cut a notch in the skid plate to fit around the slider plate. Think that would make a huge difference in strength?

 

You listed estimated shipping cost for skids but what about the DYI bumper with plate flip? Orange County CA.

 

It would be close. I get about 14" from your mark. You could easily notch the skid with no issues.

About $40 for that.

 

How would the swing out work if I wanted the DYI bumper?

 

In the past I would provide a hole in the bumper for the hinge, but I leave the rest up to you. They are fairly custom parts.

 

so when do we put in deposit?

 

PM sent about the bumper.

 

I will collect that in a couple weeks.

 

Can I get my name in for a full set and a gas tank skid in 3/16 please.

 

One last question, will the skids have to be modified to clear BAMF LCA skids?

 

I'm not sure. Maybe @Fernando knows.

 

No, they're compatible.

 

Man, you're killing me. Put me down for the bumper w/tire carrier, jerry can mount, and flip up plate. Add that to the skid set in 1/8". Could you leave the flip-up off? I'll drill and mount it myself. I'm not exactly sure I want it over the hitch.

 

I wish you made some for 2nd gens!