Tuff Country 4" lift

Does anyone have this lift? If so, are you satisfied with it?

 

Did u get this lift thinking about it but wanted to know also if it's good

 

I think Konsta (RCToy) has tuff country 5". And he's doing a SAS

 

I recently had the TC 4 inch installed and am very happy with it.

 

are any of you getting the notorious "taco lean"?

 

Did you replace the coils on the truck? If so you will more then likely experience this. If not then you shouldn't see any lean.

 

havent bought the kit yet. I was gonna get the OME kit but I dont really do any roading. I was gonna save a few bucks with the TC kit but dont want it to be a wasted 250.00 savings

 

I wouldn't recommend buying a drop bracket lift but that's just me. Spend the extra money and lift the truck correctly to avoid issues down the road.

 

have you had any compression on your ome kit? if so I read you can add the 1.5" spacer plates to combat and correct that

 

I haven't. I measured before and after and got a full 3 inches on the passenger side and 2.5 inches on the driver side. i purchased a 1/4 inch spacer for the drivers side which will give me 1/2 inches of lift. This will correct the lean.

 

Here's a pic of my truck after I installed the OME 3 inch lift with dakar package in the rear. Have 20's wrapped in 33's.

 

Ohh and Tuff Country uniball UCA's.

 

Thanks! I had minor rubbing on the fenders so I had to do a very little trimming. It's recommended to replace UCA's with anything over 2.5 inches. I would recommend 2 inches to play it safe so I replaced mine with Tuff Country uniball UCA's.

 

Looks nice. I may just bite the bullet and get the OME kit. found a uca kit on suspension connection with uniball for 427 shipped

 

I would highly recommend doing that instead of installing a drop bracket lift.

 

what kind of rims are those

 

XD Monsters 1st gen

 

Stags how are the TC uca's working out? How's your alignment and the handling on the truck? Any vibrations or tracking issues?