TW Live

@DavidK

 

Pretty easy really, the bundled wires are low volt hard copper, these are you're stations ( zone 1 zone 2 etc these tie into the solenoids (little round fuckers) & can be wired with either lead off solenoid (translation: you can't fuck up cause either will work polarity wise)

He knows more than A-Trac????...

 

Actually David is very knowledgeble with irrigation.. good call spincter boy...aka oZ-t

 

Mount them to the frame

 

Well dang.

 

That's good cause you don't need to mess those bad boys up

 

you're in CA and watering the grass? isn't that punishable by death?

 

speaking of having wood

 

So the zones were already set and then the dog chewed up the wires. So I just have to wire it up, turn the zones on and if they work good shit and if they don't just rotate the wires around?

 

I'm only allowed Monday & Thursday. Where the county over has no limits...even though I'm on the border of Claremont/La Verne. Either way I just want to fix the wiring. My planter is on a drip system.

 

one of the four wires is the common, one wire from each solenoid goes to the common (doesn't matter which one).
if you open up the controller you should be able to figure out which wire is the common and which wire controls zone 1, zone 2, and zone 3.

 

Meatloaf sammie

 

This. I'd just open up the controller and see what's what.

 

You fry your meatloaf?

 

no I usually wrapped it in bacon and bake it or smoke it but my wife made this, its just baked, but deep fried meatloaf does sound pretty good

 

found this and im in