LED Tail lights installed. NO BLINKERS WORK

I'm sure there is a thread on here about this. I couldn't find one. I installed full LED rear light fixtures in my gf's 2007 TRD Sport. Everything works but the blinkers. Running lights, brake lights. No flashers up front or rear or light on the dash. I heard you need to install resisters to trick the computer since LED puts out much less power. But i installed the stock lights back before anything else and the blinkers still don't work. The flasher module/relay was also replaced.

I did check the horn/cruise fuze...the kit said it might blow that. PLEASE HELP!!

 

Not sure this is your issue or not, but as far as resistors go, you might want to just put in an electronic flasher. But I don't see why your stock lights didn't work after. Check th3 other fuses?

 

Yeah it's very weird. The relay is good too. Resistors are needed for the LED. heck I even disconnected the battery thinking it might reset it. Still nothin

 

using resistors is more of a bandaid, if you get the proper flasher then it will work like stock.

 

had this happen to ma a few days ago, check the fuse box under the hood for blinker. I don't remember which one it is, just check one by one and im sure you find that one that burnt out.