What Have You Done To Your 2nd Gen Tacoma Today?

did you find it?

 

@Casper66 yeah I was reading it & think I'm just gonna have do some self offing for this. Lol. What's always hot to begin w/ in fuse panels do you know? &/or something I can tap off of?

 

i haven't delved into the electrical system on these trucks yet i don't think any of the power points stay hot when key off

 

@Casper66 I'm thinking bout making a "hot bar" like my s10 has so I can tap things off that as well as a blue sea setup under the hood. That should eliminate this problem haha. My fogs are wired straight off battery to my switch (didn't have them when I bought truck) so that way I can power them from either instead of straight off battery. I'll rig something up lol thanx for the help

 

no problem i just read your post and thought hell i just read that i may do it myself you can always convert it to an auxillary fuse block later

 

Finally installed my P&L Keyless thingy for the topper. It's been sitting on the work bench for months. I finally got time to work on all the projects that I had on the back burner.

http://www.popandlock.net/Truck_Cap_Lock/Cap_Leer/Cap_100XQ/Power_Without_Handle


Drilling the topper next to install the second half of the PrInSu rack.

 

What is the link to those lights

 

link?

 

The fishing rod holders are my own design and the cup holders came from Academy Sports.

 

I'm on solo missions more often then not. Some times I have a copilot, but it's usually just me and the dog - almost never another rig.

Today I turned around before it started to get deep because I was on a different mission (bear hunting), but I couldn't resist driving up to see how far down the snow still is.



Next one's a month or so old - if you look under the picnic table, you'll see the snow is way beyond frame deep.



Both pics are at least 15 miles from pavement and much farther from any town. Some of my areas are more remote by far.

 

Led Strip Light behind custom grill

 

AKC I ran the Halo wires into the cab a placed a lighted switch in the dash just under the oem switches like this so now I can turn them on or off when I want

 

Got some 265/70/18s Cooper Discoverer ATPs mounted Monday. Still havent touched the pinstripe yet

 

Those look so nice! Clean truck

What light bar/mounting option did you go with?

 

yes but took i it off. im selling it now. im afraid someone might step on the non cable supported side. the design prohibits using a cable with it since there is just enough space for the dampener.

 

Thanks! I got both for Christmas. They were purchased on Amazon. The mounts are a direct bolt on the crash bar and the light bar is a 30 inch. Nice snug fit on both.

 

I plastidipped mine, but didn't take it off. I taped off the plastic on top and took the plastic piece on the bottom off. Then after doing it, I realized the plastic then looked like crap compared to the rest of the bumper, so I taped the tailgate and the lights off (as seen in the picture) and put a couple of coats on the plastic to make it look better. I did it over the course of the day to let the separate coats dry.

 

Rear diff breather behind taillight, put on a sticker, and then cleaned it out for a 3.5 - 4 week road trip we're leaving on today

 

I hope there's a trip report in the works. Safe travels.

 

It took me about 20/25 mins to take the bumper off you don't need to drop the hitch the bumper will slide off with the right bolts.Yep dipped it that was actually the longest part dry time.