What have you done to your Tacoma today? 1st Gen Edition

8.5" (the 10" was a bif to long in factory location) with skyjacker leafs. Warranty on them so il just get a new set when i feel like taking them off. Plan is to replace them with some relocated 9100s

 

If its rubbed off now itl rub off again.

 

Not if I changed tires/wheels

 

True. Or just add wheel spacers.

Id just give it a quick spray of black rust paint.

 

Great thanks!
I figured as much just wanted to check

 

I'm running AP Expos with Billy 5125 10" in the stock location with the stock bump AND these ES 4.5" bumps for now. I do plan on upgrading when I figure out how to do it right. No issues yet. We'll see how they hold up.

 

Some dude here used this called ospho that I want to try

$16 Ospho 605 Metal Treatment, 32 Fl Oz (Pack of 1)

https://www.amazon.com/Skyco-Ospho-Surface-Prep-Bottle/dp/B000C02CDG

 

Yea i didnt like how little uptravel i had with bumps relocated. Lotso droop though.

 

I'm debatting removing the stock bump for the same reason, very little up travel. Droop is ridiculous.

 

Any takers on a 1st gen TRD e locker axle? 4.10. $500. Have 1st gen complete rear end, leaf springs, etc. Let me know. In CO. Posted in trading forum too.

 

I got $6500 out of it after deducting $800 for the salvage fee, It's an easy fix I just need to get the parts together. Paint job won't be cheap either.

 

Its a recurring thing for me. I just hit it with a little black paint to cover it up. If it looks rusty maybe give it a little sand and clean first

 

Curious what peoples thoughts are on my issue. I have trouble getting my engine to start I have to occasionally give it some gas for it to fire up. Is it possibly my fuel pump going out? It seems to be getting worse slowly over time. My engine is supercharged w/ 7th injector.

 

Haha, I have 11"s in the stock location, works well though.

 

Paint





But seriously...






Paint

 

Could possibly be the pump. How old is your fuel filter. Filters get clogged over time and their a cheap fix. Heck even a faulty fuel cap can give you a drop in fuel pressure, also a cheap fix.

 

I bought boost today

 

So I need some opinions, I'm hoping by the end of this summer gettin new shoes on the truck and my brother brags about his toyo RT but they're pretty high in my budget so I was wondering if I should say screw the budget and go for them or if their are other great substitutes. Let me know!

 

If you've got a buddy that welds, I'd highly recommend just welding in your own crossmember over the BAMF kit. Cheaper and much more versatile.

Which truck's it going on?

 

Oh, and,