NJ B.S. Thread

Better off drilling holes and tapping them

 

I can't recall if the station has a drill press or not... If they do Ill be doing that. My slider holes are drilled

 

Don't need a drill press to do that

 

Youre right... For some reason I was thinking the plates were hardened steel.
But if that were the case I wouldn't be able to drill it at all.

 

Def don't need a drill press.

 

We added fab's aal and drilled/tapped his plates for the bump stops that day.

 

Ahhh I see. Wel looks like Ill tag that out tomorrow!

 

During the week is tough but I could try

 

@Yamaha_TacoR1 you get those depo lights yet

 

Im going to do the drill and thread method today. Should work just fine

 

Yup they are on point

 

RokBloks gone to @Tatts521

 

Winch gone to @Tatts521

 

I welded mine on.

 

Remember I'm first in line for the stockers

 

True story

 

Alright, figured I'd ask around even tho I'm about 93% sure on this. I've got a 2006 Tacoma trd sport (non locker rear) SR5 V6 with the 5 speed auto. My gear ratio for the axles is 3.73 correct? I remember finding the info with the ratio decoder from the vin plaque but can't find now. I'm asking cause I've got a good lead on a front ifs center with 4.10's and only 20k miles on it and think 4.10's will be perfect me since I don't ever plan to run 35's

 

My 11 has 3.73. I am a sport also.

 

From what I've read, 4.10 is only available with 4 cyl models... @The Hunter youve got 4 angry squirrels under the hood, what ratio do you have? And if you don't know, can you check what you axle code is on the Vin Tag