Lifted on 265's. Show Me!

How about 275's

 

^ E rated. Defeats the purpose of a small lift for me. Sharp truck though.

 

That't a sexy truck!

 

It's called undercover hidden winch mount, it replaces the aluminum cross brace behind the bumper

 

Looks great. What lift do you have on there?

 

Thanks! Makes a long bed look so much better. I have setup from Headstrong Offroad. OME 885 coils, Bilstein 5100s all around, and SPC Light Racing UCA. So far about 200 miles in and it drives great. Can't wait to hit the dirt

 

Thanks for getting back It's crazy that I see so many trucks with that same lift and some barely look lifted, while others look perfect like yours.

I'm currently talking to Marie at Headstrong about this same lift. Really struggling between 885 coils vs. 887 coils and out back a single AAL vs progressive AAL. I really want to do it right the first time.

 

I went with 885s since I didn't want to go too high and also have the 1.5" Deaver AAL out back. Had a full bed full of camping stuff and it was great.

 

Awesome. I may just go with the single AAL. Last camp trip truck had myself and 3 passengers (2 were women), was not loaded very much in the back, and was hitting bump stops on forest service roads. I'm looking to avoid this problem in the future. The truck is my daily driver though so I thought single AAL might be too harsh without a load. How would you say it compares to stock out back? Any worse?

Really appreciate the feedback!

 

884OME,3leaf aal/with overload in,5100@0,gained about 2.5" on all 4 corners, ride is great. 2.7L, 5spd,Headstong,Marie is the best

 

I think the 5100s will help w/ your issue as well. Feels better than before, probably because of the 5100s

 

I'm looking at this same setup as well. Were the UCA's needed with your setup? How mich height did you end up with?

 

Nice truck! What size tires are these

 

Don't know if you noticed but all three trucks have SCS SR8 wheels?

 

275/70/17 Bfg ko2

 

Missed the thread title, eh?

 

Hey there guys...new to suspension so I thought this would be a good parlay...had her up on jacks for wheel/tire installation. Yes, I know it's a 3rd gen in 2nd gen thread.

I'm trying to figure out what lift would produce this kind of height...3", 4", 6"?? It looked super clean with these tires.

Yes, these are 265/70/17
Thanks in advance for any help!

 

265/70r17
A little bit taller tire but you get the idea. I ended up with the same tire in a 285/70r17; about an inch wider and taller.

 

Good looking rig...I may be partial