Cutting fender?

So I'm going to have to cut 2" of my flares to fit 35". Does anyone have before and after pic after cutting 2". Any advice at cutting them? First timer scared

 

@HolyHandGrenade

 

I'm leaving my flares off. This is how I did the fenders though.

Masking tape fenders where you'll be cutting, make the cut line, cut with tool of choice (jig saw, angle grinder, die grinder, etc.). I used a die grinder.

I marked the fender by drilling two holes in a piece of wood 2" apart. Put a marker in each hole. One to run along the bottom lip of the fender. The other making the line as you go. I didn't take a picture. This would work for the flares too