What Have You Done To Your 3rd Gen Today?

Great thanks I'm going to try it that way first. Seems to be the easiest. I can always rewire it if I get the flicker. How do you like your lights so far. Pretty bright?

 

<iframe width="560" height="315" src="https://www.youtube.com/embed/aX-O0BbkT_A" frameborder="0" allowfullscreen></iframe>

 

You know what I did with my 3rd Gen today? I locked it up at 75MPH due to a wreck on the freeway in front of me. I have a TRD OR, with the Wrangler Adventure A/T Tires, and I hit it so hard I chirped them 2 times at 1 second each (ABS doing it's thing). That bastard stopped hard, I was mighty impressed. No bald spot on the tires either, these tires are proving to be a pretty decent OEM tire. No damage, but wife had a cow

Side note, got an average 23.9 MPG over 310 miles of driving. Not trying to hypermile, just driving it. Not bad for a 4x4!

 

Which intake are you running?

 

its the k&n

 

It's way louder in real life, like a racecar

 

So fresh

 

Where did you get the color matched emblem?

 

I had a similar experience travelling about that speed, traffic ahead was coming to a stop and I was distracted for a split second, never pushed on a brake pedal so hard, those ABS brakes stopped the truck without skidding and in a very short distance, without ABS I would have totalled my truck. Thankfully the wife screamed before impact resulting in rapid right leg movement to the brake pedal. ABS is amazing.

 

Its 1G3 touch up paint paint from the dealership. I sanded and hand brushed the OEM emblem. (my emblem was already kinda messed up so I experimented with it)

 

here's some "normal" driving...

<iframe width="560" height="315" src="https://www.youtube.com/embed/8qyNbgV38tw" frameborder="0" allowfullscreen></iframe>

 

I haven't been able to hit the brakes hard enough to engage ABS yet. And I've stopped HARD. Maybe I'm doing it wrong.

 

Honestly when it happens you'll not be so interested in seeing how it does at the moment, but you'll be glad it's working

 

Probably true, but I'll post-analyze it like I do everything. Stupid engineer brain. Damn thing never turns off.

But I've done a couple of sudden 85-0's while driving a 'tad' too close to the car in front of me (3ft bumper-to-bumper spacing is plenty, right?). I feel bad for y'all to have to stop harder than that. But I'm glad to hear that the truck can do it if asked to do so.

 

Hi Everyone! Last night my arm rest cover arrived! Its not for my pets but its for me! My last ride before the Taco was a 2000 Ford Ranger and my arm rest got really soiled so I really want to keep my arm rest cleaner this time around!

Sorry its a night shot but I installed LED's a little while ago also.



Here's the link if anyone is interested

https://www.amazon.com/TOYOTA-TACOM...72613022&sr=8-4&keywords=tacoma+armrest+cover

Thanks for stopping by! Good Night!

 

I believe I need new pants.

 

What radar detector do you run in your taco?

 

Have you gone out to a big, open parking lot and picked up a bit of speed (while going straight) and then STOOD on the brake pedal? I mean foot to the floor hold it there and feel the ABS? IMO, this should be done as part of every new vehicle "familiarization" because the last thing you want is to not know how to do that and what it feels like in a real event.

 

Nope.

I don't think it matters all that much, really. For all cars (that have ABS), procedure is same. Hold steering wheel in neutral position. push the brake pedal as hard as you can. relax your neck and back, if possible.

 

New boots for my silver taco BFG K02 265/70/17, 17" Metal Black TRD Pro wheels