Blazing Blue Pearl Thread

Added a light bar and added my Sumos:

 

New taco owner here!

 

Good choice! Welcome to the forum.

 

my dumb ass still cant figure out how to remove those panels without the fear of breaking them off...

 

Just pull hard.

 

super easy,pop up a corner with plastic trim tool. relax pix later if you want

 

Yes please.

 

let me see what i can do my good man

 

ok,here we go,be patient,im not the waco kid! all doors,pop edge up and lift straight up. left ac vent,pop up with fingers,go easy because black trim comes with it-seperate after its out-screws. center trim is same way,but put your steering tilt down. steering wheel is easy too. its nice how toyota did the trim to where you can seperate and no taping! hope this is a start and do not rush and use the clear coat! I will next time as it should be a breeze.

 

I appreciate the help. I will have to attempt it when I get some free hours.

 

that will be $300 bucks please-LOL--no problem!!

 

I did that Blue trim bit a while back, took our technician all of three minutes to pop off the pieces. I had them do the trim when they did the hood. Still waiting on the TRD Pro grill and wheels to be released, but here's what I've got so far.



Got the truck tent going for 6ft bed with a power inflatable air mattress for the 110V outlet in the bed.


The crew. The Taco and the 1st Gen 4Runner 4X4 are mine. FJ is a buddy of ours, who I just got into the FJ for a smokin deal.

 

i think the pooch is looking for some talent! nice scene!

 

I parked in front of the gym yesterday and everyone that walked by my truck took a nice long look. Bbp is breaking necks

 

Here's a sneak peek of my new decals. I'll post more pics when I finish blacking out my badges.

 

Ya'll have a link or post number for the paint?

Thanks!

 

hang tight!

 

look at page 86 #1711

 

I installed my Low Range Off-road 3/1 lift leveling kit Friday afternoon. I'm going remove the lower valance/air dam/ road squeegee today. Think I need new wheels and tires now but the 265/70/17's will have to do for now since I just put them on at the end of June. Need to get black step bars and black TRD Sport bedside decals to replace the stock silver ones.

 

Did you install it yourself? Does it sit level or is it nose high? The guys at low range indicated the 1" block in the back might not be enough to have it sit level or provide a slight rake and offered me a deal on the 2" block. Your truck looks real nice. Post up more pictures when you can.