1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

GREAT video on how to clean your seats.

Discussion in 'Detailing' started by QMEDJoe, Sep 1, 2016.

  1. Sep 1, 2016 at 11:00 PM
    #1
    QMEDJoe

    QMEDJoe [OP] Proverbs 3:5-6

    Joined:
    Nov 4, 2014
    Member:
    #141714
    Messages:
    2,389
    Gender:
    Male
    First Name:
    Joe
    Fleetwood NC
    Vehicle:
    2003 black DLX Tacoma,5VZ-FE,5 speed,4x4.
    Fox 2.0 Coilovers in the front and Fox 2.0’s in the rear, Total Chaos UCA’s, Al-lpro expo leafs, K&N cold air intake, TRD headers,Magnaflow catback exhaust,URD short throw shifter, switched out my 60/40 bench seat for some Tacoma Limited seats, Replaced the vinyl shift boot for a leather one, completely soundproofed the cab w/ Frost King. Replaced stock radio with a Pioneer AVH series head unit. Focal component system w/a 10" sub powered by 2 Alpine amps. Weathertech floor mats. Line-X'd the bed. SCS Ray 10’s, Installed an A.R.E. MX series camper shell. All-Pro Apex front bumper w/ All-Pro skid plates all the way back to the Trans. Low Range fuel skid plate.
    sadmrhappy and tcBob like this.
  2. Sep 3, 2016 at 1:20 AM
    #2
    QMEDJoe

    QMEDJoe [OP] Proverbs 3:5-6

    Joined:
    Nov 4, 2014
    Member:
    #141714
    Messages:
    2,389
    Gender:
    Male
    First Name:
    Joe
    Fleetwood NC
    Vehicle:
    2003 black DLX Tacoma,5VZ-FE,5 speed,4x4.
    Fox 2.0 Coilovers in the front and Fox 2.0’s in the rear, Total Chaos UCA’s, Al-lpro expo leafs, K&N cold air intake, TRD headers,Magnaflow catback exhaust,URD short throw shifter, switched out my 60/40 bench seat for some Tacoma Limited seats, Replaced the vinyl shift boot for a leather one, completely soundproofed the cab w/ Frost King. Replaced stock radio with a Pioneer AVH series head unit. Focal component system w/a 10" sub powered by 2 Alpine amps. Weathertech floor mats. Line-X'd the bed. SCS Ray 10’s, Installed an A.R.E. MX series camper shell. All-Pro Apex front bumper w/ All-Pro skid plates all the way back to the Trans. Low Range fuel skid plate.
    Before...

    image.jpg

    After...

    image.jpg
     
    jjsul likes this.
  3. Sep 3, 2016 at 7:45 AM
    #3
    QMEDJoe

    QMEDJoe [OP] Proverbs 3:5-6

    Joined:
    Nov 4, 2014
    Member:
    #141714
    Messages:
    2,389
    Gender:
    Male
    First Name:
    Joe
    Fleetwood NC
    Vehicle:
    2003 black DLX Tacoma,5VZ-FE,5 speed,4x4.
    Fox 2.0 Coilovers in the front and Fox 2.0’s in the rear, Total Chaos UCA’s, Al-lpro expo leafs, K&N cold air intake, TRD headers,Magnaflow catback exhaust,URD short throw shifter, switched out my 60/40 bench seat for some Tacoma Limited seats, Replaced the vinyl shift boot for a leather one, completely soundproofed the cab w/ Frost King. Replaced stock radio with a Pioneer AVH series head unit. Focal component system w/a 10" sub powered by 2 Alpine amps. Weathertech floor mats. Line-X'd the bed. SCS Ray 10’s, Installed an A.R.E. MX series camper shell. All-Pro Apex front bumper w/ All-Pro skid plates all the way back to the Trans. Low Range fuel skid plate.
    I would say it was worth it but expect to put aside a whole day to do both seats. Between removal, bringing them to the laundry mat and install took me about 6-7 hours. Pretty straightforward once you get into it but a complete and total pain in the whatsaahmahoozit!
     
  4. Sep 3, 2016 at 7:47 AM
    #4
    retroboy1989

    retroboy1989 Single Cab 4x4

    Joined:
    Apr 8, 2016
    Member:
    #183693
    Messages:
    738
    Gender:
    Male
    Vehicle:
    99 2.7L 5spd 4x4
    My interior needs this so bad
     
  5. Sep 3, 2016 at 7:50 AM
    #5
    QMEDJoe

    QMEDJoe [OP] Proverbs 3:5-6

    Joined:
    Nov 4, 2014
    Member:
    #141714
    Messages:
    2,389
    Gender:
    Male
    First Name:
    Joe
    Fleetwood NC
    Vehicle:
    2003 black DLX Tacoma,5VZ-FE,5 speed,4x4.
    Fox 2.0 Coilovers in the front and Fox 2.0’s in the rear, Total Chaos UCA’s, Al-lpro expo leafs, K&N cold air intake, TRD headers,Magnaflow catback exhaust,URD short throw shifter, switched out my 60/40 bench seat for some Tacoma Limited seats, Replaced the vinyl shift boot for a leather one, completely soundproofed the cab w/ Frost King. Replaced stock radio with a Pioneer AVH series head unit. Focal component system w/a 10" sub powered by 2 Alpine amps. Weathertech floor mats. Line-X'd the bed. SCS Ray 10’s, Installed an A.R.E. MX series camper shell. All-Pro Apex front bumper w/ All-Pro skid plates all the way back to the Trans. Low Range fuel skid plate.
    It's amazing how clean they do come out. I put them in one of the big industrial washers. (It cost about $7.00 for one load) The whole cab of my truck smells like clean laundry! :thumbsup:
     
  6. Sep 3, 2016 at 7:51 AM
    #6
    retroboy1989

    retroboy1989 Single Cab 4x4

    Joined:
    Apr 8, 2016
    Member:
    #183693
    Messages:
    738
    Gender:
    Male
    Vehicle:
    99 2.7L 5spd 4x4
    Im sure the water is black after a few minutes on the agitate cycle.
     
    QMEDJoe[QUOTED][OP] likes this.
  7. Sep 3, 2016 at 7:57 AM
    #7
    QMEDJoe

    QMEDJoe [OP] Proverbs 3:5-6

    Joined:
    Nov 4, 2014
    Member:
    #141714
    Messages:
    2,389
    Gender:
    Male
    First Name:
    Joe
    Fleetwood NC
    Vehicle:
    2003 black DLX Tacoma,5VZ-FE,5 speed,4x4.
    Fox 2.0 Coilovers in the front and Fox 2.0’s in the rear, Total Chaos UCA’s, Al-lpro expo leafs, K&N cold air intake, TRD headers,Magnaflow catback exhaust,URD short throw shifter, switched out my 60/40 bench seat for some Tacoma Limited seats, Replaced the vinyl shift boot for a leather one, completely soundproofed the cab w/ Frost King. Replaced stock radio with a Pioneer AVH series head unit. Focal component system w/a 10" sub powered by 2 Alpine amps. Weathertech floor mats. Line-X'd the bed. SCS Ray 10’s, Installed an A.R.E. MX series camper shell. All-Pro Apex front bumper w/ All-Pro skid plates all the way back to the Trans. Low Range fuel skid plate.
    I went to HD and bought some hog ring pliers and hog rings and never even used them. I probably used about 4 hog rings out of the bag. I just reused my old rings and used needle nosed pliers and a pair of channel locks. I'm sure if you ordered a pair specifically for car interior it would go a lot smoother.
     
  8. Sep 7, 2016 at 12:51 PM
    #8
    Chris(NJ)

    Chris(NJ) Well-Known Member

    Joined:
    Jan 21, 2010
    Member:
    #29777
    Messages:
    4,884
    Gender:
    Male
    First Name:
    Chris
    Usually in Central Jersey
    Vehicle:
    08 Indigo 4x4 DC OR
    Mods are currently being changed .....
    hahah, F. That.

    Only reason my seat fabric is coming off is because it's getting replaced. And an upholstery shop can do that job. For now, some fabric cleaner, a brush and some towels will do the trick.
     
  9. Sep 7, 2016 at 6:10 PM
    #9
    QMEDJoe

    QMEDJoe [OP] Proverbs 3:5-6

    Joined:
    Nov 4, 2014
    Member:
    #141714
    Messages:
    2,389
    Gender:
    Male
    First Name:
    Joe
    Fleetwood NC
    Vehicle:
    2003 black DLX Tacoma,5VZ-FE,5 speed,4x4.
    Fox 2.0 Coilovers in the front and Fox 2.0’s in the rear, Total Chaos UCA’s, Al-lpro expo leafs, K&N cold air intake, TRD headers,Magnaflow catback exhaust,URD short throw shifter, switched out my 60/40 bench seat for some Tacoma Limited seats, Replaced the vinyl shift boot for a leather one, completely soundproofed the cab w/ Frost King. Replaced stock radio with a Pioneer AVH series head unit. Focal component system w/a 10" sub powered by 2 Alpine amps. Weathertech floor mats. Line-X'd the bed. SCS Ray 10’s, Installed an A.R.E. MX series camper shell. All-Pro Apex front bumper w/ All-Pro skid plates all the way back to the Trans. Low Range fuel skid plate.
    Fair to say I wouldn't want to do it again. Way to time consuming but if one wants them as clean as possible for the cheapest price you gotta put the time in.
     
  10. Sep 7, 2016 at 6:16 PM
    #10
    TRD2010SpeedwayBlue

    TRD2010SpeedwayBlue Well-Known Member

    Joined:
    Sep 12, 2015
    Member:
    #164039
    Messages:
    1,768
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2010 Speedway Blue TRD Offroad
    or you could just detail them with the proper detail extractor and get it done in 30-40 minutes.
     
  11. Sep 7, 2016 at 6:23 PM
    #11
    QMEDJoe

    QMEDJoe [OP] Proverbs 3:5-6

    Joined:
    Nov 4, 2014
    Member:
    #141714
    Messages:
    2,389
    Gender:
    Male
    First Name:
    Joe
    Fleetwood NC
    Vehicle:
    2003 black DLX Tacoma,5VZ-FE,5 speed,4x4.
    Fox 2.0 Coilovers in the front and Fox 2.0’s in the rear, Total Chaos UCA’s, Al-lpro expo leafs, K&N cold air intake, TRD headers,Magnaflow catback exhaust,URD short throw shifter, switched out my 60/40 bench seat for some Tacoma Limited seats, Replaced the vinyl shift boot for a leather one, completely soundproofed the cab w/ Frost King. Replaced stock radio with a Pioneer AVH series head unit. Focal component system w/a 10" sub powered by 2 Alpine amps. Weathertech floor mats. Line-X'd the bed. SCS Ray 10’s, Installed an A.R.E. MX series camper shell. All-Pro Apex front bumper w/ All-Pro skid plates all the way back to the Trans. Low Range fuel skid plate.
    IMO, There is no way you'd get them as clean by putting them in an industrial size washer machine. Granted, I'm not looking forward to ever doing it again but it's my truck, I enjoy it and don't mind putting in that extra effort to make it that much better. Plus that machine would probably costly, other than the hog ring pliers and hog rings ( which I didn't need) it only cost my $7.00 for the huge washing machine. I'm happy with the end result and I learned something new.:hattip:
     

Products Discussed in

To Top