Fabtech, ProComp 6" lift or more. Pictures

I flipped mine because it was backwards now the top drivers link that attaches to the nuckel will not stay tight

 

Lock-tite it.....
and that's surprising because mine were seized up both times I tried to take it loose.

 

Thanks will try that

 

So I bought coilovers used from another member on here @Toyota Man . They are bilstein shocks with eibach coils with a threaded sleeve that downey offroad customized. it will give me between 0" to 3" inches and everthingt in between. I will set it to 2". and for the rear Im awaiting my shipment of 3.5" blocks with new u-bolts. I already have the stage 1 pro comp lift and I am aiming for 8" all around. What else will I be needing or am I set? I will buy ucas when I can swing the funds for now stock ucas it is. My driveshaft doesent have the spacer either, so should I order that up too?

 

Yeaup, you will stretch that shaft apart with all that 'murica in your lift.

 

ok so what size spacer? not seeing a lot of info on it but ill keep searching.

 

Wait..he has a double cab right ? Driveshaft spacer ?

 

yes double cab . do I not need it im still investigating it on other threads

 

You don't need a driveshaft spacer. They are only use on trucks without a slip yolk to keep the driveshaft properly seated at the transmission when you have a lift. All double cabs have a two piece driveshaft with a slip yolk on the rear shaft at the axle end.

 

@IndigoInk is your truck a 4wd ?

 

awesome exactly what I needed to know thank you for like the third time mr evenflow. Will be installing the additional lift here next week will post pics.

 

yes it is 4x4

 

Its a prerunner thing, if you have 4x4 dont worry about it.

 

sweet save some money to put elsewhere thanks

 

U will need those UCA's real soon. Front alignment will be way out and they will look pulled down all the time. I have a 9" super bro lift in the front....11" in the rear.

 

All loaded up and off to the shop. Should be drop bracket free by the end of the week!

 

I was wondering if it would be worth it to take it off or just sell as is. Are you going to sell the DB lift? I have a PC stg2 I wonder what it's worth used.

 

I've got somebody set up to buy the kit (stage 2 also) at $900 which I think is pretty reasonable.

 

So what goodies did you get to replace it?

 

Just a simple OME kit with Dakars. Going for an Expo type build so that should suit me well.