What Have You Done To Your 3rd Gen Today?

I like who makes the roof rack.

 

LOL its begging you.

 

Nope, Just the right amount of black

 

That's a prinsu roof rack.

http://www.prinsudesignstudio.com/_p/prd12/3118211191/product/2005---2016-toyota-tacoma-cabrac

 

I,'ve been low on fuel more than few times and never seen that prompt before. Maybe I could go a little more just to find out.

 

Not sure if this was answered or you still need the info. Both are "correct", but the driver's side can unlock every time the driver's door unlocks and the passenger side only unlocks when that side unlocks. I have mine wired to the passenger side.

 

Got my CaliRaised Light covers today and about 20 min later they were installed. All you do is glue the magnets onto the lights with he provided glue and then the magnets stay on the ditch lights so the covers will quickly pop on and off.
I got AMBER and RED for my covers.
Can't wait till it gets dark !

 

My 3rd gen build started last weds. Leer cap and prinsu design cab and cap rack installed. Now everything you see here and a few things you don't are going on over the next couple days.

 

I completed my "Bully Edition" mods and dipped my badges. Might have a professional artist/graphic designer re-do my bedside drawings, but they r good enough for now (I hope!).

Shout out to Teq Decals for the great job on my bedsides and Flags 'n Hitches for the awesome custom trailer hitch cover (and not giving up even tho it took 4 tries!).

 

haha that's bad ass!

 

Thanks! I'm a little shy to put it out there cause it's kinda cheesy. Hopefully people see the likeness to my dogs hanging there heads out the window!

 

Yea, the low fuel light came on and then after the needle went completely below the E that came up

 

It was a scary light because I couldn't find an exit with a gas station. I still went for a while. It was only getting 6mpg pulling that F250.... It was actually so confused that the low fuel light came on when it still said 110 miles to empty, but the needle was way down there

 

what % tint for the fronts? Is it match with the rear?

 

added a soft topper to my 3rd Gen - very very please!

 

It is 20%. It matches the factory pretty good. I would say it's slightly darker then the factory tent if you look real hard. I'm happy with it. Here's a side view. It is a little lighter in sun light then this picture.

 

what film did u use?

 

Where did you put the wiring and the capacitor and what did you use to keep it in place? If it is a double sided hi temp tape who makes it and where can you get it? I ordered the lights and checked today at HD but they didn't have any high temp double sided tape or silicone.

 

Laminx yellow film on fog lights. It's not dark enough for night pictures yet.