TW's active 4runner builders BS thread

@CaliRaisedLed
Locals get good deals but I'm sure he will give a tw hookup

 

Also, what's a reasonable price for my OEM bumper? 40 bucks?

 

I sold mine for $200 on CL

 

Serious? Ooook changing monies.

 

yup. Sold it in less than a week too.

 

I was not aware of that at all. I'll give it a shot.

 

well i just went full garbanzo on some 2.5 King Bypasses.

 

thats what i tell the wife..heeyooooo

 

I haven't had any Garbanzos in a loooonngggg time

 

any reason why making something like this for the upper mount wont work on the rear of the 4runner? thinking outside the frame rail (providing room)

Obviously making it fully welded, not bolt on.

 

also was looking at these mounts for the uppers. Without the axle cut out and think of them upside down on the side of the frame with the boxed end facing up.

http://www.ballisticfabrication.com/Lower-Shock-Perpendicular-Bolt-Bracket-Axle-_p_2016.html

Lowers
http://www.ballisticfabrication.com/Lower-Shock-Parallel-Bolt-Bracket-Axle_p_2019.html

 

this is all without really looking underneath and using the shock to see clearances. Its all thoughts and research until the shocks come in.

 

Holy tits

 

don't take the 4runner to the surf.

 

...again...

 

I looked at those as well and is where I got the inspiration for the mounts I built, but no, those are not going mount right up.

X2, are you making the mounts, or having a fabricator do it?

 

combo of me and a friend who welds and has fabbed his SAS w/ coilover and bypass swap on his 90s F350. Pretty sick build. But Im just looking at ideas for now. Wont be 4-6 weeks until i have them in hand to actually do something.

EDIT: Im 100% open to any and all suggestions.

 

OME/Camburg BJ UCA lift installed. Pretty happy with it. Maintained the factory rake so it'll sit level-ish when loaded up with cooler/camping gear/dog.