Gramp's Old Guy Build - Agnus the GX

Nice! Looks good man

 

SO NICE!!!! just keeps getting better and better

 

Looks so good!

What water tube you going with?

 

could almost fit a water tank between the rack and light to fill that gap...would keep it low too

 

I am considering Road Shower but they are 55"s long. And I want to still fit in the garage so I have to do some more research. Might have to build one.

Actually the winning idea in my head right now is similar to that but on the backside of the rack between the rack and the tent. I can fit a 55"s road shower back there but would need to fab up some brackets. Something I will be talking to Corey about.

 

Looks Awesome! Great meeting you at Toytec event Erik.
following your build is a wish list.

 

Have you seen these? Considering one of these for myself...

http://www.thewaterport.com/

 

Likewise Zee. Let me know if you have any questions. I will do my best to answer them and keep you moving in the right direction with your build.

 

I have looked at this option and it is still on my list. However they are SOLD OUT of everything right now. I do see that they only carry 3 gallons whereas the Road Shower is 5 gallons. You get a temp gauge on the Road Shower too and a stronger AL tube. But for just about twice the cost. Front Runner also has some cool options for water but they are not pressurized. Looks like I need to do a lot more research.

 

Just adding this link here so it doesn't get lost. Need this for future reference.

http://buy.northstarbattery.com/p/nsb-agm-31m-battery?pp=24

 

Is that the same as you have now, just by another name?

 

That's an expensive battery

 

they had a group buy for those earlier in the year i think

 

I am pretty sure that is what this is.

Yeah it is.

Yeah I saw that. But no point in buying another battery when the current one works great.

 

Great build! Any reason for not clamping the reservoir at the bottom but doing so in the middle instead?

 

Thanks man. So with the Rokmen UCA'S they have so much adjustability that you can move the entire arm forward. So that puts the arm too close to where the resi should be mounted. So i had to slide the resi down and the bottom "fixed" clamp mount then moves up onto the body of the resi. Not optimal but the Rokmen arms are way bad ass so worth the move.

 

Do you have any more fender clips laying around? I need this style:

 

Maybe. I will have to check when I get home later this week.

 

Oh hey there!