Colorado Trading Post

Belongs to a friend of mine. Mint condition
http://m.ebay.com/itm/222275524710?roken=cUgayN&_mwBanner=1

 

White truck cap off my 03 but will fit all 1st gen Xtra cabs. All the lights work, no broken windows, has locking latches, and the shocks for the rear window still works. Only selling it because I now have a bed rack.

SOLD

 

Hey guys have seat covers from my old taco. Wet Okole full piping in mocha with taupe pipe look great. With center console cover and cleaner kit too. Well taken care of. $280 shipped or $250 picked up or dropped of if you meet me in Denver.

 

Anyone know if these will work on a 16 DCLB?

 

Yes

 

Technically yes they will fit, @Triggerhappy but I wouldn't feel comfortable selling them to you because of the 600lb spring rate they have. OEM spring rate on a 2016 has 717lb springs, these are only 600lb and I believe the 2016 BOSS kit comes with 650lb.

You would also have to crank these down slightly since they are set for a 2nd gen and the 3rd gen come from the factory with 1" of lift

 

Ok, I'm thinking of getting these from you and pairing them with the following. Anything I'm missing to be up and running on this lift? UCA's would probably be a little further down the line. Are extended brake lines a necessity?

Anybody feel free to comment.

 

Bump

 

bump

 

Skip the diff drop and no need for brake lines.
My worthless opinion.

 

I'm with eric, skip the diff drop and i can show you what i did for a rear brake line extension when you pick up the coilovers. Seems like you have everything you would need to put together a lift kit. I'm going to PM you for details on pickup and other stuffs

 

WTB drivers side roof moulding, AAL for OME dakar (pn#

$81 D29XL Leaf Spring

D29XL)

 

Also have Pelfrey group 31M battery tray never used $100. Can meet up in Denver most days during the week

 

Selling these for 60$ I make them with pallet wood. PM if interested!

 

looks great, very tempting what are the dimensions?

 

around 18 inches wide, 11 inches tall. its a decent size.

 

Found some parts laying around while moving this weekend that I would like to get rid of.

I acquired some miscellaneous parts for retrofit headlights a while back and need to get rid of them. I ended up getting fully built headlights from another member for free, so I have no use for these parts:

Morimoto Mini H1 6.0 Projectors (PROJECTORS ONLY) - $50





Gatling Gun or Mini Gatling Gun Projector Shrouds (No clue which model...) - $Free w/ Projectors





Morimoto XB Halos (WHITE) 70mm Diameter - $10




Also have an 18ft Firestik Coax - $10


Nothing has been used/installed.

 

Can those be diy'ed into my headlights?

 

They are all DIY parts, not sure how the Mini H1s would look in your headlights, though. I'm not even sure what the common projector is for 2nd gens.

 

Bruh!