1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Adding grease zerk to LR UCA bushings??

Discussion in 'Suspension' started by RBoyd0325, Oct 26, 2016.

  1. Oct 26, 2016 at 6:26 AM
    #1
    RBoyd0325

    RBoyd0325 [OP] Well-Known Member

    Joined:
    Jan 22, 2012
    Member:
    #71198
    Messages:
    117
    Gender:
    Male
    First Name:
    Richard
    Alabama
    Vehicle:
    08 TRD Off Road 4x4 3" lift
    Thought I would give the LR ucas a try since I'm ballin on a budget....the ball joint has a grease zerk, but can I add two zerks to where it mounts to the truck? Im not sure if the plastic bushings are stationary, or if they move with the control arm when its mounted. So I don't want to tap a zerk in there and then it interfere with the bushing trying to rotate. Im taking it to the shop this week to have them installed so the sooner the help the better! Thanks
     

Products Discussed in

To Top