Colorado B.S. Thread

I forgot to mention that you need to watch at least 3-5 videos of doing the same thing to build consensus.

 

NO NO AND NO

 

I've always seen it say 1 before!

And I dont think it changes on the switch when switched on/off. And I'm not tapping into stock wiring with an "iffy" switch.

 

You guys are a bad influence.

 

@aero3685 on the correct setting, it should buzz when wires are touching. So for switch it's closed it should buzz and when switch is open no sound

 

I hate electrical too!!

@aero3685

 

We shall start buy pulling the distributer cap wires while the truck is running leason to show thwm how to find a misfire.

Ill be setting the controls on the welder.

 

Speaking of that my truck drivable again!!!

 

Is it 4x(2^2) yet?

 

It's fwd atm and speaking of that you got time to modify cross member Sunday or Monday after class?

 

Be careful, Jack. That's a slippery slope you're heading down.

 

I dont think that will be a "time after class" project.

 

What do you mean.
Math is my dance moves



Booty rating

And this

 

Ya think? Just the middle part needs to go forward a inch or 2
From pics I've see others rebuild it out of 1x3 tube steel

 

I guess yours will not be as bad as mine was but its still fun.... its the same bolt patern correct? We can use the stock stuff, cut it off and slide it forward 1-2 inches or what ever and weld it back in??

 

That's what my thoughts and hopefully plan is. This way Brandon can have his block of wood back

 

Did brandon weld that in? That should be plenty as long as its got no OL resistance to not short things out.

 

Well coop and I used a jack to make it fit

 

it did it at one point...but not through the switch. But then it wouldn't buzz at all. Hence my throwing in of the towel.

 

Speaking of throwing in the towel. Amazon and I are not on speaking terms.. as of last week.

but I had a credit on my account and figured I should use it and just send it to the PO Box since I wasn't in any rush. Then I get this notice yesterday about the package.

"Carrier was not able to deliver your package because either signature was required or the delivery agent was not able to find a secure location to leave the package unattended. Please look for a notice of attempted delivery for the next steps."

Oh really... no safe places to put it at my PO Box for a $12 monopod?!!? WTF Over!