Total chaos, Camburg, or Light Racing UCA'?

I have had TC, Camburgs (nice details), All Poo, and Icons. I wish I still had the photo of the different ones on top of each other. If you are concerned about being able to dial in your alignment - get ones with heims instead of poly bushings. You can adjust them so that the alignment is neutral on the cam tabs.

 

We are launching a new website soon so there are a lot of products not up yet.

Retail - $899

TW Discount - $836

 

Do you guys make UCAs for first gen tacomas?

 

I've had my Camburg UCA's for about 3 years and have had no problems with them whatsoever. As long as you grease the bushings & spray dry Teflon lube on them you're good to go. As for alignment, here is my latest specs w/ ICON Ext. travel CO's. As for the red at the top, my shop teacher at the college said that is still within specs. We spent about an hour aligning my truck as it was way out of alignment. I also put too much preload as you can see in that picture so I took some off and the truck rides so much better now. And here are my UCA's w/ my previous Bilstein/Eibach lift.

 

Unfortunately no we do not.

We only have it for the Gen 2 and 3.

Sorry

JT

 

anyone with uniballs that complains about the noises BOLO for the new Icon replacement sealed ball joints meant to be stronger than stock application and designed to be used in a uniball type arm. will allow for the useo of a heimed UCA like dirt king with a sealed ball joint that most guys prefer for a DD. they are in development and are being produced in multiple sizes to fit most existing UCAs. just got back from SEMA with MRT motorsports.

 

Is there a trade in program with you guys for my TC UCA

 

PM sent!