What Have You Done To Your 3rd Gen Today?

Those are not black/grey ?

 

This is what I have done to my Tacoma as of yet. I've changed the front grill from my chrome grill to this amazing customcargrill with TACOMA. I've added a Universal N-Fab Mount in the back where I store my fifth tire. Also, in the bed of the truck you can see I installed a fire extinguisher. I wanted to add to the stock exhaust so I purchased a TRD chrome tip, painted it black, and had that installed. I didn't take pics of the LED lights prior to installing them but I have changed the license plate lights, dome light, and overhead lights in the center console all to an LED cool-white. I also have added HID headlights for both hi beam and low beam; as well as, HID fog lights. So much more light!! I also added a 4" lift with my new tires and wheels.

I'm still waiting to figure out how to install LED lights into my two visors. I have a couple more things on order that I'm waiting to receive such as a hood scoop, front AVID guard for my bumper, and a new switch panel to add more switches. I have the one that has three switches and then the lighter. I ordered the one that has five switches and the lighter. Im also thinking of ordering the overhead console with the extra two switches because right now I have two switches up there with the off road package. I'm going to install LED bed lights with a switch in my truck this week. Then last couple things that will be done down the road a bit but I want to install a 30" LED into my AVID guard and a 50" curved LED on top of my windshield. Follow that with a platform rack for the top of the cab. Then, I think that will be all as of right now.

 

Ok. Great. Thank You!

 

Looks black & green to me. I dig it.

 

How do you see out back window with that tire mounted there?

 

It's an olive/military green.

 

Do you have the part number for the back Matt. I found the front drivers and passengers on eBay, but it doesn't include the back single Matt that goes accross the whole back.

 

You know...you have to weigh out what is important to you. I can see out the edges. Not straight behind me, but if I really wanted to, I could just lower my universal mount.

 

$111 Genuine Toyota PT908-36164-20 Black All Weather Floor Liners

https://www.amazon.com/gp/product/B017YAIJYM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

And while you're at it you might as well get some of these to keep the passenger side front from moving.

http://www.ebay.com/itm/171348959983?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

Hell ya.. Unfortunately I am too busy in the summer to get much done to the truck. I am tired of the sloppy/bouncy TRD OR suspension. Draggin the hitch receiver off road is getting old. Merry Xmas too me

 

KYJO your truck looks excellent ! Realy good good job . If you don t mind the factory bed d ecal has to go and get a black decal. It just looks out of place in silver you know.

 

Thank You!

 

Which one?

 

Are you talking about the TRD 4x4 Off Road Decal? If so, do you have a website for the black decal?

 

Looks fantastic good job

 

https://www.tacomaworld.com/threads/custom-made-vinyl-stickers-bedsides.281228/

 

Thank You!

 

Just threw these on...

 

Did this today.

 

Installed my 2nd gen NFab steps on my 3rd gen. Long story short, they do fit. The plastic cap on the front end is touching the body mount so I'll remove the cap, cut the tube down, and put the cap back on. The front mount is also different. The bolts are spread part about 5" OC on the 3rd gen and only about 1.5" OC on the 2nd gen. I put one bolt in up front rather than 2 and it's plenty sturdy. All other bolts lined up perfectly and they fit nicely. I'm not a fan of steps, I don't like or want them, don't have a choice with 2 kids and a petite wife so it is what it is. I guess that's part of driving a lifted truck lol.