I Made Some Better Radio Knobs

This!

 

About what diameter are those knobs? My originals were .63" and those look a little larger.

Not sure, but I'll look into it. If not, I can make a set that would.

 

X3 !

 

Awesome!

I'm going to order a set of these as the stock knobs are a PITA to use.

I did go out and try and pull the knobs off and their on there good, and I have a pretty damn good grip with my fingers.

 

You've been killing it with these products. Dont stop!

 

I don't know about your AC output knob, but mine has more clicks than what is available. For instance it takes me 2 clicks to go from one selection to the nxt, its a little frustrating but nothin I can't overlook.

 

@wileydavis I dont really want to send you my TRD OR fancy radio knobs and go knobless, since I do use them, but post the dimensions of your knobs (ID and/or splines or flats on the mounting side) -and I'll figure out if they would work on the "fancy" radio.

 

I just got some pictures and the knobs are quite a bit different. The non-nav radio doesn't have the support tube coming off the faceplate like the nav versions does, it's just a rectangular metal post. The OD is the same but the post is different.

 

I agree, leave off the "Volume" and "Tune" on the knobs. There's a description on the radio above each know anyway.

 

X4 for jbl/nav headunit!

Edit: agree with no lettering on knobs.

 

I think they saved on material when making the knobs to have leftovers for the steering wheel radio controls...hehehe. Anyways was going to order but decided on upgrading HU. Keep on makin awesome stuff @wileydavis !!!

You guys got some awesome products!!!

 

Sub'd. If you make some that work with the Entune Premium radio then I might go for a set. Also, don't like the stamped lettering as it'll almost never be turned the right way...

 

Here's a quick pic of my dimensions.
I'd buy a set for sure if they fit.
I like the marked ones ok.

 

The ones I have now won't fit but I'll be working on a design for the nav head units. How far out does the central metal post in your photos stick out past the plastic support tube?

 

I'll add in the option to have words or not words on the knobs. For now, if you're ordering, just leave us a note on the checkout page specifying which you'd like. No note will default to words.

Just to update, these will fit the 3rd and 2nd gen non-nav head units. If your knobs look like the photo below then our knobs should fit. Available here:

http://www.hondogarage.com/index.php/product/landing/tacoma-radio-knobs

 

THIS!!! Damn HVAC controls are a PITA to use with gloves on (TRD/OR with the dual climate control horseshit). Would be nice if they stuck out from the dash further. HAAAY - make em look like Duratracs lol

Frank

 

I just though about that too...

 

Here's a more accurate pic.

 

@Kilokato - thanks. any chance you can send me a measurement of the support tube OD and ID?

 

i would definitely pay money for a set of those.