What size is the Icon coilover lower uniball?

I bought my shocks second hand and they are in need of a new lower uniball. This is the joint where the shock attaches to the lower control arm with a bolt and nut. That small lower uniball is sloppy and I need to know what size it is so I can acquire a new one from ORW or similar. Any ideas on the size?? Thanks

 

the Icon site lists them as 5/8" (6th bullet down on the list)

http://www.iconvehicledynamics.org/catalog/product_info.php?cPath=23_41_82&products_id=82

you'll be able to find them here

http://www.mcmaster.com/#heim-joints/=6lw9dp

 

Thank you. Is the top one a 5/8 as well? I noticed it only listed one bearing size and didn't say whether it was a lower or upper...

 

IDK if the top is 5/8" as well but i know the bottom is 5/8". good luck

 

Both top and bottoms are 5/8" for all Tacoma models.
5-8610's, 15's, 30's and 35's.

 

I have a lower uniball gone, just got the Icon's before winter. Called icon and they said they won't pay for the uniball and they want $40+ for one, so is this what I need? If not what one and where can I get the best price? Thanks!

 

I believe this is what you seek >

http://www.summitracing.com/search/...er-in/0-6250-in/?autoview=SKU&keyword=Bearing

 

Thanks for the help!

 

My passenger side is gone too... I haven't taken it apart yet but do these need to be pressed in and out and which one is needed exactly? ^^^

 

subd because i need to order some of these

 

Bumping this thread, need a clarification, there are 2 different race widths in this link:

http://www.summitracing.com/search/...er-in/0-6250-in/?autoview=SKU&keyword=Bearing

FK WSSX-T/WSSX-TV Wide Series Spherical Bearings WSSX10T has a race width of 0.567 inches
http://www.summitracing.com/parts/fkb-wssx10t/overview/

FK FKS/FKSSX Precision Narrow Series Spherical Bearings FKSSX10T has a race width of 0.500 inches.
http://www.summitracing.com/parts/fkb-fkssx10t/overview/

I imagine that's a pretty important measurement in order to get the circlip/snap ring to seat correctly, can anyone definitively give an answer which will fit in an Icon coilover for a Tacoma?

 

Bumping this thread again-

To clarify, it is the narrow race bearing. Made the mistake of buying the wide series and they don't fit.

FYI, Sway-a-way 2.0 race runners are also the narrow series.

https://m.summitracing.com/parts/fkb-fkssx10t

 

You can also get them from Poly. I used the narrow ones(COM10T was the universal part #).

http://www.polyperformance.com/fkssx-t-fkssx-tv-precision-series-ptfe-lined-bearings

 

Check your notes. I just physically verified on a 99 Tacoma by putting the offset spacers that line the lower heim where the lower strut bolt goes through and the wssx10t was too wide.

 

Yep, you are correct.

 

What about this puppy?

https://m.summitracing.com/parts/qa1-com10t

I need to replace them in my Icon RR coilovers and thought COM10T is what I need. Kinda confused now with all the different products and prices...

Edit: I have a 2010 in case it matters. And where do you get those snap rings, mine are shot

 

Bump, urgently need to buy but don't know which

 

Anyone????

 

COM10T

I prefer FK products but the QA1 will work.

You can always call Icon and get a set with spiral locks direct from them.

 

If you want to get bent over and effed up the .... then sure, buy it from Icon lol.
I actually measured the misalignment spacers last night and my race width seems to be 9/16".
But where can I buy the snap rings??