What Have You Done To Your 3rd Gen Today?

I installed the TRD cat back exhaust to go with my TRD air filter. The TRDUSA website states that this adds 5-8 Hp for the 2nd gen exhaust so this should be in the same area. While this is not much it does seem to be more responsive. The sound is really what sold me on it. There is not much difference until about 3k RPM but it is really sweet after that. I have a neighbor who lives a few houses away with a Ram truck with some kind of exhaust that wakes up the entire neighborhood every time he starts it up. While that may be for some people, it was not for me.
I am considering a URD y-pipe for my next upgrade. Since it would remove the rear 2 cats I am concerned that it may be too loud and void the factory warranty. Any input would be appreciated.

 

that was us. lunch break.

 

A set of these Subdued Decals would go well with that set up!

 

Plastic dipped wheels and removed badges and front air dam

 

Did the 4Runner TRD Pro wheels fit as-is, or did you have to put some sort of spacer in there? I also want to get 265/70/17 tires, but I like the look of the KO2s.

Tried digging through this thread and many others to see if somebody cleared this up, but can't get to the bottom of it. Figured you'd know for sure since you've done it! Thanks

 

Haha no. The extra foot is at the front of the bed, not the rear.

 

What is that bump stop you have on top of the flipped u-bolt kit?

 

Did you have to do anything special plasti dipping your wheels? My friend is looking to do the same thing. Any step by step you can provide or just spray away?

 

Wheeler's Off Road Super Bumps

 

Installed this very rare limited edition ice grill

 

ARB Differential Breather. Right now I just have the rear hooked up. Eventually I'll add Front and transfer case


Stainless Steel Brake lines from @OCTaco


BAMF Recessed Grill from @JLee

 

Yes, the 4Runner Pro wheels fit as is, with no adjustments, additions, etc. needed.

You can even use your factory chrome lugs, I just went with black ones to match.

 

Removed my airdam. Looks so much better.

 

Get a quote from 3 body shops, have the guy pay you cash and then go get a plate bumper.

 

Those look nice, I might go that route, the Brocelona's need something to break up all the red back there.

 

Excellent. Thanks

 

Debadged tailgate handle. We share same handle as the 2014-up Tundra. The link has now been updated showing it fits our Tacoma.
https://www.ebay.com/itm/361580394162
After swapping handles I added sound deadening material to minimize the actuator noise. It works well.

 

where'd you get that deadening stuff?

 

Nice I've been wanting to do this Found even cheaper here

http://www.ebay.com/itm/Rear-Tailga...ash=item568e940ceb:g:1BAAAOSwA3dYWjcH&vxp=mtr

 

It's Noico brand from Amazon