3rd Gen LED Low-Beam, High-Beam & Fogs

I'm still happy with mine. No problems so far.

I don't know if they're an exact match to the DRLs, but I honestly can't tell. Both appear to be bright white, but on the cooler side.

There are inline voltage regulators that are very small. About 2" long, 1" wide and 1/3" thick. Very lightweight and easily tucked away into the cavernous front end.

I've been running these for several months with no issues from an electrical/computer standpoint. Plug and play, no dash lights, codes, nothing.

The only downside to these is that they have less throw than HIDs. But there's no lag or warm up period. Simple on and off.

 

I prefer my Morimoto 2-Stroke LEDs over the HIDs that I tried. Just my opinion.

I got a set for the low beams in my wife's Forester and she loves them too.

 

So I installed these today. Super easy install which was nice but now my high beams don't stay on when I push forward on the flasher lever. I can pull back and flash my high beams but I can't keep them on. Any suggestions?

 

Nevermind I got them working. They are bright and work great!

 

So just to make sure, all three (HIs, LOWs and Fogs) are size H11s? And they come with an amber sleeve? Any pics of the fogs with the amber sleeves?

 

LED lows and fogs.

 

Sorry, I work a lot so I don't check TW as often as I'd like to.

Yes, all 3 will take H11 on the Gen3.

I personally only run the white, but I'll be back in a few minutes with ambers in.

 

Captions on bottom. All shot at 1/60 f/4.5 ISO800 WB Set to 5500K


Fog Only - WHITE


Fog Only - AMBER


Fog & Low - WHITE


Fog & Low - AMBER & WHITE


Fog Only Interior - AMBER


Fog & Low Interior - AMBER & WHITE