10mm spacer only on one side with OME set up

Is it normal to need a 10mm spacer on only the drivers side with 5100s and 881 coils on a 04 double cab? I knew people put 1/4" spacer but seems like i need a 3/8" (10mm). Not sure if that is normal for that much of a difference?

 

That's the trim packer that comes with the kit, right? That is for the Taco lean and it's normal.

 

No i had to order them separate and it came with 2

 

Then you need the 1/4" aluminum spacer too

 

Why would i need another 1/4" spacer if it sits level now with the 3/8" spacer? I just wanted to know if that amount is normal to correct drivers side lean

 

Dude. What????? No.

 

They are sold individually, so not sure why you got 2.

Either way, every truck is different. If yours is level, it's level. Doesn't matter what you needed to get there. All good.

 

Ok cool man thx!

 

You don't have gas tanks on both sides of your truck do you? Then you don't need two spacers.

 

NO !!

I don't see the need to level the truck out PERFECTLY.

That is completely anal, IMHO. Add gas, burn gas, add weight, and then remove weight. Who the f*ck runs around with a tape measure?

My truck runs just fine with both fronts set at 1 1/4" on Icon c/o's.

 

That's because you're on coilovers. The full OME kit, as you know are coils and shocks, comes with the driver side spacer. Your truck will look stupid af with how heavy the gas tank leans the truck on the driver side.

 

My bad!