Need help

so I've been trying to do my install and I'm having some issues. I can get the speakers to play but it cuts in and out. I've followed the wire chart when it came to splicing behind the headunit.

I am using the lc7i
All Powering and ground is fine but for my 6.5 speakers when it hits a bass note it will get static or cut out. If the volume is up it gets static. Please help.

 

Check all of your wiring carefully. You may have some wired backwards. Check the jumper settings, especially the "summed channels" jumper. You don't want that. Make sure you have a good ground. Lastly, tinker with the lci7 output settings vs amp gains. Sounds like the amp is amplifying a distorted signal.