Sema Pro Trd wheels with 265/65/R17

I have 265/65/R17 Hankook dynapro ATM's on my truck right now. I just ordered a set of the sea Ted pro wheels that are 7". Will these fit on the new set of wheels? They ate also almost worn out. Would there be a better looking size for my truck. I have a double cab ling bed sr5 with no lift.

 

My dream wheel.....and I have those same tires. Please post pics when done.

If replacing the tires, I'd bump up 1 size to a 265-70/17. They fit fine with no rubs and look a bit better personally.

 

Yes. Thats stock TRD Sport tire size.
I'm running 265/70/17s on mt TRD Pro wheels.

Btw I hope that is a bad pic. Wheels should be matte not gloss (ick).

 

Thanks guys. One more question. Is there a way to switch out the red trd logo with a Toyota one?

 

No, that size rubs lol

 

What size rubs? The 65 or 70?

 

I beg to differ. Plenty of clearance and have never had rubbing.

 

70.

Pretty much anything bigger than stock size rubs on these trucks.

 

Turn tight or hit a bump while turning and they rub. Also have to remove the from mud flap/guards too.

 

I have the sema rims with 265/70's and 6112's set to 3 ; they DO RUB.

It's extremely minor and I have to be turning and compressed but they do hit.


ETA: My truck is not a mall crawler.

 

I have the grey version, but yeah, mine rubbed for a long time with 265/70/17 until I leveled the truck and put on some aftermarket control arms to get the caster above 2.5 degrees. They would always rub when I backed out of the driveway and turned. Never offroad, but I'm sure they would rub when compressed too.

 

Wondering this as well. It says 265/65/17 approved rim width is 7.5" - 9.5", and Pro wheels are 7.0". I've heard some shops won't mount them but others have said no issues.