What have you done to your Tacoma today? 1st Gen Edition

well the stuff i linked too doesn't have the sticky back. But you can still stuff it around the dash in nooks and holes and things. Should help a lot. If you can get the sheets stuck on the fire wall itself that would be great too!

 

Got mine nice and dirty the other day after an afternoon of shootin and wheelin. It was still raining when we hit pavement again so I got a headstart on the wash as well.

Edit: Just realized when looking at this pic that I lost the drivers side headlight trim piece. No clue how I managed that

 

Oh yea I guess it helps to click the link lol. I have the peel and stick stuff in my cart already. Ill add a few yards of that too probably. Ill find some way to use it

 

So I'm cleaning my truck out and vacuuming it and I pick up both floor mats and they are kinda damp in one spot to the center near the seat, it was very warm moisture, I think that's what's making my truck smell weird lately, looked underneath and everything is fine, no rust holes or anything, looked above the trans to see if maybe moisture got in there and ran down and still no problems, any ideas? Is it normal? It was about 60 degrees out today and I had the ac on for a few minutes at a time at most

 

Man I feel like I'm asking alot of questions but whats a good replacment for the 3.4L AT radiator ?

 

I've bought 6 different radiators for 3.4 Tacoma over the years. Ive always gone with what is cheapest on Amazon or eBay.

They all fit perfect and worked perfect. I consider rads disposable items. I seem to damage them and require replacement. I never worry about rads going bad from age.

I run a scan gauge all the time, there was never a difference in operating temps.(there won't be if t stat is working properly).

 

Looks like it should fit. My 03 I painted looks the same.

 

Got rid of the clock mod

 

What a guy. I <3 this community

 

Theres a write up on here somewhere

 

https://www.tacomaworld.com/threads/how-to-change-factory-clock-into-voltage-meter.269631/

 

Just going off looks, that looks like it would work

 

Thats pretty awesome! im going to have to add this to my list of things to do while my dash is apart

 

Ethan's skid mounted ... awsome skid! Thanks Ethan!!!

 

What does the back look like? Might attach differently as I know my 98-00 did not fit for 01-04

 

I concur. Wheel/tire combo is just right.

 

I forget, these are pre changeable filters for the ventilation right?
So replace that puppy, or better yet find a way to make it easily replaceable?
Or do the 1st gens not have them at all?

I assume you have a bluetooth radio and you already routed the mic up through the driver side a pillar and attached it to the underside of the sun visor?

 

No filters at all unfortunately. I thought about finding a place to add a filter but im thinking the fan pressure would be too restricted.
Im oldskool on the stereo. I have a usb female connect cable going to my center console where i hook up my phone.

 

Thats not oldschool. Thats the best school. Bluetooth bit rate is horrible. You're also bypassing the phones built in amp and giving you stereo pure digital info of the song and letting its DAC do the work.

 

Changed the fluids in the rear diff and trans case but couldn't get to the front .Found my skid plate is being held on by a nice stripped bolt. After I cut the rusty skid plate off I'm gunna try to bend up some sheet metal for a skid
Anyone know what gauge would be good?