What Have You Done To Your 3rd Gen Today?

Installed these Tyger side steps last night.... Totally worth $280 for em!

 

Modified my intake. Trying to get a different sound so i removed the resonator/baffles. Made a little difference but mostly at full throttle.

 

Cheap wire terminal kit from any auto parts store makes all wiring projects a breeze

I also used a mulitimeter to verify the fuses I used were only on with the ignition. If you want to add electronics to any vehicle those are very important tools that can be had for about $10 each.

 

What brand are these?

 

Where are you ordering the knobs? Part # and install instructions

 

Question for you. What did you use to cover the whole after you cut out the resonator? Also, Are you running an aftermarket air filter? I've been thinking about doing this and just gluing a piece of plastic then wrapping it like you did. Looks really clean. I already did this with an Afe pro dry filter. https://www.tacomaworld.com/threads/stock-air-box-mod.439003/

 

Toyota's product: http://www.sparksparts.com/accessor...ed-cargo-bed-lighting-00016-34089?parent=1541

(Likely made by 3rd party company)

 

After I hacked of that tumor I sanded everything smooth, covered the hole with red gasket sealer (heat proof) and a piece of rubber gasket. Wrapped that with some heat resistant tape, Then wrapped it with header wrap and black ties. Using K&N drop in filter.

 

Hey man I don't want to sound harsh but your alignment is a little off... That being said very cool decals super original!

 

RT Steps installed...

 

http://www.hondogarage.com/

 

Getting ready for a Baja Race on my vintage bike so purchased a Tacoma as a chase truck..

Added a BajaRack roof rack and used two cross beams from voodoo fabrication a cut down HF ramp and a cheap wheel chock to form a removable carrier. Front wheel up means I can close the tail gate.

Also some Rotopax fuel cans and firestik and CB.. Few more mods to come.

 

Also added a pair of ditch lights.

 

How easy was install? im debating between these and the one a person offers on here (they r under rail)

 

Ridiculously easy. Once I took the time to do some figuring out.

The brackets are available from various places and just bolt to your hood hinges. Loosen one bolt at a time, attach front of bracket and retighten then attach rear bolt, that way you don't need to align anything..

Wiring under the hood was is straight forward.

There is a small rubber plug on the drivers side of firewall. I pulled that and drilled through the felt, I then drilled a small hole in the plug to make it a grommet and pulled the switch wires through.

How dd you run wires to rear?

 

They increased the price?!

 

Just received and installed the Un-Holey Dash Mount phone kit and phone clips from Hondo Garage. Pretty impressed at how sturdy this thing is, quality is top notch!

 

Looks good, I may have to pick this up from Hondo next.

 

Not sure if oem but ships from a Toyota dealer in Daytona Florida

 

The box