2010 4Runner Mirrors Worked!

Sweet, thanks for the info!

 

@crunchy11 did you find a solution?

I have a similar problem except I have a 2011 and they still don't fit.. damn aftermarket mirrors

 

New mirros I guess

 

New detailed write up coming soon! PARTS WILL BE HERE WITHIN THE WEEK!!!

 

Do Tacoma mirror covers with the turn signal lamp fit the OEM 2010-2013 4Runner mirrors or do I have to order covers specific to the 4Runner mirror?

 

Fits perfect. All you have to do is swap them over. It's a little pita though removing them from the assembly, just take your time.

 

Thanks and will do!

 

@adio How did you wire your puddle lights? I currently did the mod, my truck was wired for turn signals and just hooked these straight into the side mirrors. Don't need the heater option since Hawaii doesn't get to cold to need the option. I'm stuck on how to wire the puddle lights (where does the Positive wire into and where does the negative wire into?). Mahalo nui loa.

 

Try this, go to page 2 & 3 it shows you where to tap into to get illumination. I know it's for the illuminated transponder amplifier mod but it's pretty much the same concept.

https://www.tacomaworld.com/attachm...illuminated-transponder-amplifier-pdf.899056/

 

Thanks for responding. Unfortunately, I am unable to view this link. I receive the following error notation that I do not have permission to view the page. Any help of why this showing???

 

Shoot from the looks of it you might not have enough post counts for you to able to see it. I'll get pics up of that PDF file.

 

@PainaBoi96797 Here hope this works.

 

Much Mahalo Nui Loa @adio This really helps and hoping to tackle this mod along with adding Fog lights tonight. I hope I can post up pics tonight as well. Will make sure to give you a heads up and shout out. Again, Mahalo nui loa

 

Rajah that. Anything to help out a fellow local member.

 

Those are what you ordered.. is that the same as this?

Look at this on eBay http://www.ebay.com/itm/310724327096

Was thinking of buying them tonight to put on my 2011.. I want blinkers but not heated, as I'm in Vegas. Is the wiring all fairly easy?

Thanks

 

The eBay listing for your link is the same seller but I can't be 100% positive. It looks like it though.

The wiring isn't difficult but I did have to figure out the colors in the mirror to know what wires served what function. Getting wires through the flex tube from the door to the body was one of the difficult parts for me personally.

 

Ordered. They'll be here on Tuesday. Hopefully I can figure out the wiring. I don't need the heat, so I'll probably leave that alone.

booya. Now I just need to fix my bumper where some asshat hit me in a parking lot and didn't leave a note, and I'll be looking new again. Between that and the wife breaking a mirror, I was angry.

 

So just swap new ones to the mounting hardware on current mirrors and I'll be all ready to go. no messing with the wires on that part.

Then, looks like wiring the puddle lights is a pretty detailed task, tapping into the blue dome light wire by the fuze box and a power source. Shouldn't be too hard... What about the blinkers? Do I have to tap into wires for that too. I didn't think I needed a new connector, but looks like I might.

any advice?

 

I did mine. Thanks everyone for your input.
Factory mirrors and covers
Highlander heated switch

 

Was the wiring hard DJ