What Have You Done To Your 3rd Gen Today?

I got the 1" ones. They are sold each (not in pairs). Good company to deal with. These lay pretty flat so in my opinion, the more the better. Adds versatility.

 

Wasn't that bad! Did it by myself. Had it on in less than 2 hours! Hardest part was removing the stock bumper. After the Fab Fours 2016+ Toyota Tacoma Premium Rear Bumper was on, it was nothing to get it lined up. Only issue I have, my trailer plug wire is too short by about half an inch to reach the plug on the bumper now.......Will have to splice it and add some wire now....... ! Now I have a Stock Silver painted plastic Tacoma 2016 Sport rear bumper for sale if anyone wants one.

 

Yes. I removed them and then painted them the barcelona red

 

Yeah. I purchased 8 1" last night. Excited to finally complete that mod

 

Plastic derped my grill and lower bumper thing. Will be plastic derping my fender flares too.

 

Are you riding on the ProComp Stage 1 lift? How do you like it?

 

This looks awesome, anyone out there have the black vinyl letters on their pro grille on a black one? Trying to decide if I want to leave the letters alone or get them in black to match the paint.

 

Looks good. Thinking about the lower bumper and flares also. If ya don't mind, post a pic of the flares when they are done.

 

I like it. Looks really clean, Hugo. Do you mind if I asked where you ended up ordering it from? From what I can find, Bumper Superstore is the cheapest @ $849 w/ free shipping. Did you find it elsewhere cheaper?

 

What does that LED light kit do? Is it a replacement for the low beams? high beams?

 

Installed a new 24" light bar behind my front grill. This thing is freakin bright! Took about two hours to install, 45 minutes of it was me trying to get through the firewall .

I also used a mictuning LED Light Bar Wiring harness kit from Amazon.com. Makes the whole install super clean and easy. My favorite thing about this mod though, is that the light bar required no special mounts. There are are existing holes in the frame behind the grill that I bolted this to.


Topcarlight 24inch 120w LED Work Light Bar Flood/spot Combo Beam Lights 4wd SUV UTE Off Road Car Boat Lamps by Topcarlight
Link:

$29 Nilight 12" 300W Triple Row Flood Spot Combo 30000LM Bar Driving Boat Led Off Road Lights for Trucks,2 Years Warranty

https://www.amazon.com/dp/B00MTK21VU
$27.99


MICTUNING LED Light Bar Wiring Harness Kit, Fuse 40A Relay On-off Waterproof Switch by MicTuning
Link:

$19 MICTUNING LED Light Bar Wiring Harness Fuse 40A Relay On-off Rocker Switch Blue(2 Lead)

https://www.amazon.com/dp/B00PTQOF4W
$16.99

These two items get you 99% of the way there. Add a couple of male wiring connectors to the light bar and shave the blank hole for the switch to fit, and you're done!

 

try lowering the brightness in the settings.

 

yea man im gonna have to use ur idea there awesome!

 

I used 1/8 inch steel and a thick washer between the bed rail and backet. Also used some sticky foam like weather stripping between the bracket and bed rail

 

Any suggestions on either the morimoto 2 stroke led or morimoto 35w HID 5500k?

 

Installed Subaru Kicker tweeters, 100% bolt in replacements for non JBL systems

 

Softopp'd and RokBloker'd

 

dont know if its the phone or the truck but we got new galaxy s8 at work and my trucks wireless charge (the qu charge that build into the truck) wont charge the phone. i have the button on (indicator turned on) and left the phone for 3 mins and it never started charging.. any info for things to check would be cool.

 

So this is the one with the BSM kit. Have you noticed any difference yet between the stock bumper and this one?

 

Hay got my question answered.. that was all I was worried about.