Bilstein 5100s with spacer

Hi guys,
I haven't really been able to find much on this config.

I bought a set of 5100s a while back and haven't had the chance to install them yet. In the mean time I've been debating different configurations and am set on one:

5100s with stock coils set at 0.85" with half inch spacers, to yield about 1.5" lift. The reason i don't want to set the struts at 1.75" is to reduce preload. I don't want too stiff a ride.

There should be no issues with this setup, right?

I'm also installing the wheelers 3 leaf 1.5" AAL. 5100s back there too unless someone can convince me otherwise.

Thanks.

 

My honest recommendation is to pick up some OME 883 or 884 coils and set the 5100s at 0. It'll ride a lot better and coils could be had for less than $200. Or some eibach coils, but I'm less familiar with those.

 

Seems like the best option. I like that the 883's only give 1.5 lift. Not looking to lift too much