Offical Gears and Locker Group Buy!! NOW OPEN!

Waiting to hear back on that.

 

I didn't get a PM..

 

Depending on your tires go with 4.56 or 4.88 with install kits F/R, Solid Pinion Spacer would be good and axle bushing (recommended for some setups)

Not too sure on the Locker what else is needed locker, compressor but not sure what else. Have not done the homework there.

 

well, are you regear too? if so, do as posted above.

The ARB kit comes with everything you need to have it installed, wiring, switch, air line, the lot. You'll get a free small compressor to run the locker from ARB too, but it won't fill tires.

That said, as of right now, you must buy 1 R&P set to get the 15% off, so if you weren't planning on regearing you won't get a discount on just a locker, we are working on seeing if this can be changed.

 

http://www.arbusa.com/uploads/PDF/accessorizeYourRig/toyotaTacoma.pdf

According to the ARB link, listed above, I think you'll be needing the RD132 locker. Probably wouldn't hurt to call them and double check.

 

I fall in this category! What do I need to complete my rearend locker? The locker, compressor (free), shim kit. Am I missing anything? My truck has 4.56 gearing already, just wanna add the locker for those moments

 

Ugh... Always bad timing for me and GB's... sub'ing to see if this lasts long enough for my bank account to recover from recent purchases. Is there a close date on this or is it solely based on 20 participants? thanks.

 

I ordered a day before the group buy. No worries though. Low range is awesome and had an agreed price from a while ago.

 

I want 4.56 r&p F/R and front locker but dun know which r&p to order. I have 2015 trd pro with rear locker

 

Still waiting to hear back on this.

No cap on participants. But the close date is the 25th to get everyone in on the free compressor promo.

You need..4.56 R&P.

So one for the 8'' rear elocker and one for the 8'' clamshell. Install kits would be highly recomended. Adding solid pinion spacers would also be recommended. Front locker is the RD121


Rear gears are here: http://www.lowrangeoffroad.com/toyo...-gears-4cyl-v6-elocker-standard-rotation.html

For your front you'll have to know what your stock ratio is to know what carrier your have. You can decode it form the door jam using this: https://www.dropbox.com/s/6iidyyk5s3k4k73/All_Toyota_Truck_Axle_Codes.pdf?dl=0

Front locker: http://www.lowrangeoffroad.com/toyo...ell-air-locker-30-spline-3-73-down-rd121.html

 

As of now that's correct. Have not heard if we can honor just lockers.

 

Stock ratio should be 3.72

 

if you get two ARBs you'd get the medium sized compressor for free. If you just want to upgrade @Low Range Off-Road said they would give you a deal as well, but not sure what.

 

@Low Range Off-Road may be able to chime in. They did mention they can work something out on that. I went Co2 but would be nice to run tools or the option if Co2 is done.

 

I am lost??

 

am I A04B

 

Sorry, i just realized that my chart only apply to 1st gen tacomas.

Different code for 2nd gens.

If you have the V6 you have 3.73s. So you need the Thick front gear

 

So I know you added me to the list, but I didn't ask for any gears just master install kits, and didn't realize I wouldn't get the discount. If I can't get the discount just remove me, I already have 4.88s.

 

oh darn.

So wait, you were also just wanting a locker? or Lockers?

Like the 5th person if so.

Hopefully we can open this up to just you locker guys.

 

Lockers plural and install kits because arb doesn't include bearings crush sleeves etc...