Found best way to disable seatbelt chime!

Now you can open a cold one while not wearing your seatbelt!

 

Why not just do the disable process?

 

clearly someone missed a joke.

 

It's way easier to do that !

 

I just cut some blanks from a 5 gallon bucket lid. I like my truck to tell my friends to wear their seatbelt.

 

If you could tell me the disable process that doesn't require an OBD II computer I would gladly do so...

 

Drinking and driving made easy !

 

This worked for me, but I'm an older 2008.


1) Turn the Car 'ON', but do not start the engine (Leave your foot off the brake). Cycle your trip reset knob until it reads ODO. Turn the ignition back off. Wait a couple of seconds.

2) Make sure seat belt is not fastened

3) Turn the ignition back on, do not start the car (Leave you foot off the break) As soon as you see everything light up, press and hold the trip reset knob and do a long 12 second count.

4) Keep your finger on the trip reset knob. Fasten your seat belt, as soon as you fasten your seat belt, you should see the ODO display go from XXXX miles to "b-on". At that time take your finger off the trip reset knob and press it again. It should cycle to "b-off". You should be all set and turn the ignition off and unfasten your seat belt.

 

You will have to repeat that procedure after removing battery leads or if your battery dies as well. Worked for me though