1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2013 Reg Cab before and after lift pics, and billstein 5100 question.

Discussion in 'Suspension' started by tacomaruba, Jul 11, 2017.

  1. Jul 11, 2017 at 5:56 PM
    #1
    tacomaruba

    tacomaruba [OP] New Member

    Joined:
    Jul 11, 2017
    Member:
    #223806
    Messages:
    1
    Hello everybody, I just put a small lift on my 2013 Reg Cab.

    I got Billstein 5100s + 1/2 inch spacer for the front and a 2 inch lift AAL for the back at Wheeler's Off Road.

    I have a question about the billstein shocks, though. Is the setting they are on the highest setting? (check the picture below) It feels like the front should be a little higher than it is right now. The 5100s are supposed to give 2.5 inches of lift, plus 1/2 inch from the spacer. The rear AALs are only supposed to lift 2 inches. I thought the front would be higher than this. Not sure if the mechanic put the shocks on the highest setting.

    Here are before and after pics, plus a handy little GIF to compare.

    [​IMG]


    [​IMG]

    [​IMG]


    GIF below will switch after 2 seconds.

    [​IMG]
     
  2. Jul 11, 2017 at 7:41 PM
    #2
    finslayer83

    finslayer83 Well-Known Member

    Joined:
    Jul 8, 2015
    Member:
    #158996
    Messages:
    206
    Gender:
    Male
    TN
    Vehicle:
    TRDP 4runner / 01 Taco
    A lot
    I'm no expert but that looks to be on the .85" setting vs the 1.75/2.5"
     

Products Discussed in

To Top