SOLD

Hey everyone, selling a set of iron cross running boards I had on my truck. Pulled them off to go to sliders instead. They're for a double cab and in decent condition. A little paint has been scraped and knocked off and there is a dent or two but other than that they mount up just fine and look good. Looking for $200 OBO and only local. Would drive to meet into Maryland, southern PA, and northern VA.

 

Can also get pictures of them on the truck if anyone wants to see them.

 

Might be a dumb question but what's the extra black part.

 

Not at all @Dhannah, they're a bit different the way they're built. They're actually 3 pieces, the tube, the connecting bar, and the steps. That's just the one unbolted where as the other one is fully assembled

 

Oh I see now thanks picture of them on your truck? Just and you can.

 

i wonder if they would fit and how they would look on an access cab? @fatfurious2 thoughts?

 

I can tell you they are 80" long is about all, I'm sure somone has done it though

 

I think DCSB and access cab have the same mounting points, but im not sure.

 

hmm. i did put that TRD exhaust on my truck which came off a dcsb. I'll have to think about it. the woman isn't currently employed...

 

I will say that the mounting points on the access cab and the DCSB are different, well, just the rear mount. I bought a set of steps off a guy on CL and he said they were off a DCSB and they were actually off an access cab... so the front two mounts bolt right up and the last one doesn't. I've been running them for about 2 years now and telling people not to step on the rear step... I'm not proud.

Anyway, if someone with an access cab wanted to do a double trade, I'd take these DCSB ones and give them my N-Fabs. I'm also in WV (near Harpers Ferry)

 

So I will say these steps have moveable brackets the way they're made so they should work on either as long as the overall length is ok. But that trade would work well if @Redmann eould want to do that, I'm just over in Martinsburg

 

so whats up now? I like trades. I have OEM running boards from an AC. looks like @dean_park wants these iron cross steps for his DCSB and has nfabs made for an AC.

 

OP, I didn't realize these had adjustable mounts. The length for the AC and the DCSB are the same, so these should work with either.

I think the step positions are slightly different on my Nfabs because the rear step really isn't useful for the rear door people since it's shifted forward for the AC.

Yeah, I'm down for trading around.

 

Yeah they are completely bolt together so the mounts, steps, and even that black tube are all adjustable. But I mean y'all can work out the trade if you want, I'll happily drive a bit to meet ether one of you all depending on how you want to work it. Just depends on who wants what at this point

 

@dean_park do you have pics of yours?

 

@Redmann here are a couple pics.
They are bed linered.