Maxtrac kit

I currently have a CO set at 3" and an aal in the rear with 5100s. I am wanting to add maxtrac spindles and set the CO to 0-1". Eventually I would like to add an allpro or Dakar pack to the rear. If I were to get this http://www.headstrongoffroad.com/store/p207/Maxtrac_4"_Lift_Kit_-_2WD_ONLY_-_K886842.html from headstrong would the shocks work with the blocks and add a leaf? And would I be able to add the leaf pack later with those shocks?

 

I would ditch those shocks that come with the kit and sub in some extended length Billys

Marie will set you up ​

 

I had my lift put on in 2011 so I can not remember for certain if the billys were extended or regular length. Is there any way to tell once they are installed?

 

Not too sure to be honest.

Best bet is to give em a call and sort it all out

If you can, just get the Dakars with the kit.

Save you some time and $$$ down the road

 

Old Man Emu Dakar Leaf Pack (PAIR)

MaxTrac 4 inch Lift Spindle (2WD ONLY) - 706840

RCD/Bilstein 5100 Extended Length Rear Shock (PAIR) - B110

OME U-bolts - OME53B

Would this be all I need? I know I am missing the bushings but I can not find them on headstrong. The maxtrac come with extended front brake lines. Would I need rear brake lines as well? Anything else that I may be missing?

 

That's what I'm running and love it!

Probably a good idea to extend the rear brake lines

The ones HS sells match the ones that come with the Maxtrac kit perfectly

Excellent quality braided and coated lines

 

do they sell the bushings for the dakar pack?

 

Most certainly ​