Mobtown Offroad Discontinuation Sale

I just saw the thread
Figured you wanted one, now they're sold out and not coming back, but not all have shipped. Maybe you'll get lucky and someone will back out leaving one for sale.

 

They're paid for.

 

FIFY

 

Sack up and join the bed stiffener group buy to make up for this.

 

Was hoping to have this in and on the truck before I go on leave... I guess this will be in a box in my garage until i get back from deployment . Damn box inventory errors

 

So are these specially made boxes just for this item?

 

Look at it this way...you got it 40% off with free shipping. It did look like a pretty unique box. Definitely not one you can just pick up at the store.

 

Yes, we have boxes custom made for everything we ship. Almost everything we ship has a unique size and shape and without them custom boxes, we get shipping damage.

 

i work as a packaging tech for a company in CA... with that said you can save yourself some $$$ over time in supply cost by using rapid expanding void fill foam. with this you can get more generic boxes and you will intail have less down time waiting on custom boxes. if you ever have packaging paroduct you need help with you are more than welcome to hit me up.. Neway packaging (newaypackaging.com) 310-898-3400 x245

 

@Mobtown Offroad you guys ship out the last batch yet?

 

No, boxes are out for delivery to us today so I will box and ship them all tomorrow. Gotta love freight companies. We were supposed to have these boxes last week...

 

I installed mine a couple of months ago. I love it. Thanks Mobtown, sorry to see this one go. Here's my install:

This cap adds some heft to the tailgate. The spring that lets the tailgate drop slow will hold it so it won’t slam, but it is much faster. Faster than this OCD truck boy likes. I could be a pussy though.

MobTown Bed Cap install

Tools Needed (Standard): T30 Torx Bit

STEP 1: Use a T30 Torx Bit to remove the factory screws from your OEM tailgate cap along the inside of the tailgate. Then lift up on the plastic factory cap slowly working from one end. The cap is held in place with male clips into the tailgate.

My Step—remove the torx screws and use a plastic spatula or a plastic interior prybar. To pop the clips on the OEM bed cap.





2: Use a T30 Torx Bit to remove the two factory screws from your tailgate along the top side.



STEP 3: Using the supplied gasket, install it on the underside of the cap following the curve of the part.

My step- remove 6 in of the adhesive tape cover and run the gasket around the curve of the bed cap using your thumb and fore finger (like you are making an OK sign) pull the remaining adhesive cove off as you need as you move down the gasket


STEP 4: Place the Mobtown Offroad cap on the tailgate lining up all the holes. If you are using the factory plastic tailgate skin, the Mobtown Offroad cap will slip under. If you have our metal reinforcement skin, the cap will sit on top of it.

My step- Install the cap on the outside of the OEM skin. It won’t fit any other way.

STEP 5: Reverse Step 1 and Step 2 and install the factory hardware.

Point the cap on the tailgate with the two second from the outside inside, do not tighten let them float. Close the tailgate and install the 2 top screws. Tighten until the screw cannot go anymore by hand. The gasket should crush a little. Then install the remaining screws on the inside. Be careful not to overtighten. The nut plates are plastic.


Last Step--Drink a frosty beverage.

 

Thanks @Sand Shark

 

Can I buy your OEM cap from you if it is in good condition?

 

Sure. Let me take some picts when I get home today. I might have the Mobtown box as well. I'll PM you tonight.

 

That's one of my favorite beers. Great choice

 

Lagunitas is an excellent brewery. I'm drinking their 'lil Sumthin currently.

Not a beer snob...just like to taste it.

 

PM sent...

 

Might be a stretch... But still have any of these lying around?

 

No, sorry.