Show off your KB Voodoo Rack loaded up!

There are a bunch of great pics in the various threads about the @KB Voodoo bed rack system, but there are also tons of posts to scroll through to get to them. I created this thread to be pic-heavy so show off your KB Voodoo rack all loaded up so others can get ideas of where to mount stuff.

I'll start:

 

@boogie3478 how did you mount your awning? Looks like its on brackets, could you not mount it directly onto the rack?

 

Yeah it's on brackets. You could probably mount it directly to the Voodoo rack but I didn't want mine hanging down and blocking the cool "Voodoo" cutout in the middle of that top bar. It's sticking up just a bit now, but I'll eventually get a Prinsu for the roof so it will even out the line.

 

Not sure what I'm going to mount there just yet, but I add my spare mini quick fists to the rear section.

 

I just lined up the "top" holes on the mount with one of the long linear cutouts on the rack. Works great and doesn't move around at all.

 

I did place a few thin neoprene washers inbetween the Voodoo rack and the mount just to keep things protected from scratches.

 

I loaded up my Voodoo Rack with MORE Voodoo Rack (double side panels)!

 

Hmm I'm flirting with the idea of getting a Prinsu toprac to mount to the top of the Voodoo rack. Seems like it would be easy to mount but I haven't seen any pics of this yet. @KB Voodoo

 

That would be a first for me.

 

I love being first!

 

Be a pioneer!!

 

I thought about that as well but since it won't do much as I am only putting a a RTT in the future. But I'm guessing it'll be similar as putting it on the roof of the Tacoma.

 

I was toying with the idea of a Rhino Pioneer platform.....just afraid of the structural integrity combined with the tonneau brackets...hmmm

 

Updated pic:

 

look like its missing something....



maybe.....





a RTT?

 

Here's my mid-height @KB Voodoo rack fully loaded! It does have some minor rusting and was purchased used but I'm super happy with it.

I have the following mounted:

• Top
  • Freespirit Recreation High Country Series 55″ Roof Top Tent
  • ARQ4WD 270deg Awning with custom brackets
• Outside driver side
  • Two 2 gallon Rotopax mounted with Rotopax DLX Pack Mounts
• Outside passenger side
  • Boar Offroad traction boards mounted with @KB Voodoo Max Modular Traction Board Mounts (new holes drilled for the Boar Offroad boards)
• Inside passenger side
  • 48" Hi-Lift mounted with Hi-Lift
    $43 Hi-Lift Jack 4X400 4XRAC Jack Mounting System, Black
    4XRAC Mounts
• Rear
  • @KC HiLiTES Cyclone lights as third brake lights
• Securing
  • $13 Lumintrail 4 Foot 3mm (1/8th Inch) Braided Steel Coated Security Cable Luggage Lock Safety Cable Wire Double Loop (4 Pack)
    These cables and
    $28 6 Pack TSA Approved Luggage Locks for Travel Safety, Small 4 Digit Combination Padlocks for Suitcases, Lockers & Bags
    these locks (more of a deterrent)

Here's how I mounted everything:

• Tent
  • Tent to rack
    • 8x included bolts, 8x included lock washers, 8x nuts
    • Bolt > rack > tent bracket > lock washer > nut
• Awning
  • Brackets to rack
    • 4x bolts, lock washers, nuts
    • Bolt > bracket > rack > lock washer > nut
  • Awning to bracket
    • 4x bolts, lock washers, nuts
    • Bolt > bracket > rack > lock washer > nut
• Rotopax
  • Mounts to rack
    • 8x (included I think) 1/4x3/4” carriage bolts, 8x (maybe included) 1/4” lock nuts, 8x 1/4x1-1/4” fender washers
    • 1/4x3/4” carriage bolt > mount > rack outside > 1/4x1-1/4” fender washer > 1/4” lock nut
  • Rotopax to mounts
    • 2x included handles
    • handles > rotopax > mounts
• Traction boards
  • Mounts to rack
    • 4x included 1/4” carriage bolts, 4x included 1/4” lock nuts, 4x 1/4x1-1/4” fender washer
    • 1/4” carriage bolt > mount > rack outside > 1-1/4” fender washer > 1/4” lock nut
  • Boards to mounts
    • 4x 3/8-3-1/2” tap bolt, 4x 3/8 lock washer, 4x 3/8 jam nut, 4x 3/8 wing nut
    • 3/8x-3-1/2” bolt > mount > 3/8” lock washer > 3/8” jam nut > traction board > 3/8” wing nut
• Hi-lift
  • Mounts to rack
    • 8x included 1/4” bolts, 8x included 1/4” lock nuts, 8x 1/4” washers, 8x 1/4x1-1/2” fender washer
    • 1/4” bolt > 1/4” washer > rack inside > 1/4x1-1/2” fender washer > 1/4” lock nut
  • Hi-lift to mounts
    • 2x included wing nuts
    • mount w/ mounted bolts > hi-lift > brackets > wing nuts
• KC lights
  • Lights to rack
    • 2x 8x16mm full thread bolt, 2x 3/8x1-1/4” fender washer, 2x 8mm lock washer, 2x 8mm nut
    • 8x16mm full thread bolt > light > rack outside > 3/8x1-1/4” fender washer > 8mm lock washer > 8mm nut

Photos

 

It’s getting hot here in Florida so I’ve got a few months to find a tent for the rack before camping season comes around again. I’ll move the rifle case with recovery gear to the prinsu. I’m looking at those newer low profile tepui’s on the rei website. I think they are 8.5” thick when stowed. Nice and low for less drag. My mpg’s are already in the toilet...

 

Hi there

Wondering how your awning is mounted?
And if you think it would work with a traditional RTT (Tepui brand) or if it would only work with those newer styles where you don’t have to unzip all the way around the RTT to deploy it?

Thanks!

 

Subd