Wheel advice for Falken Wildpeak AT3W 285-70R17

I have a 15 PreRunner TRD Sport will Bilstein 5100's (highest setting) on the front and 1.5" spacers on the rear. I'm wanting to get the Falken AT3W 285/70/17 tires but want them to stick out past the fender about an inch or two. I do NOT want to have any fender work done or anything underneath messed with and I'd also prefer not to have any wheel spacers. That being said, what kind of wheels (rims) do I need to be looking for to make this happen?

 

Define 'messed with'. I am not sure the wheels you seek exist. The 285 ATW's run wide. With the back spacing you seek you will require a cab mount chop and a significant trim of your fenders

 

If you want them to stick out, your gonna have to trim and probably chop.

 

Definitely going to need to chop the cab mount and the fenders. Wheel spacers only make rubbing worse

 

I agree with what's been mentioned above. If you want your wheels to stick out past the fender and you don't want to trim/cut your fenders or do the CMC you need to sell your truck and buy something different with a larger wheel well.
The size you'd like, with your lift, and the positioning you want will require the fender liners to be trimming and the CMC to be done to alleviate the rubbing you'll have.
Sorry man but what you want will require fender work to be done and things underneath "messed with".

 

I have the 285/70 17s on wheels with a -12 off set 4.5" backspace on a 2 1/2 " lift. They stick out about 3/4 of an inch . Only rub in reverse at full lock . Only removed front mud flaps .

 

Which tires and what is your castor? I am guessing she's a street queen.

 

Falken Wildpeaks at/3w .Off the top of my head I dont remember my castor .Mostly street some logging roads and fields .Nothing too crazy offroad .

 

American Racing Wheels Baja 17x9

 

Side pic?