Wheel Specs

Greetings members, does any one know the weight of the 16" Tacoma TRD Pro wheel? I've seen several mentions of the 4Runner 17" Pro wheel, and the 16" TRD Beadlock (FJ wheel), but not much information on PT758-35170-02.
Thanks

 

Toyo Open Country A/T II 265/75r16 E load BSW pictured is 48 lbs.

That puts you right at 23 lbs. for the wheel. I've been searching for this all day and finally figured it out.

Hope this helps!

 

What wheels are on your Tacoma 16 x 7 or 17 x 7.5 and which wheels came off of the 4runner 17 x 7 or 17 x 7.5 and what size tires do you have and what size tires are from the 4runner
No matter the wheel size they will bolt on. The 4runner wheels sit out farther from the engine (more aggressive). Tire size and wheel width are the factors in clearance.

 

Steve, I have the 265/65/17 tires on it now I just don't know the wheel sepcs. I have seen these take offs on craigslist several times and at a good price. I figured I might jump on a set.

 

4runner wheels will fit and just stick out a little farther than stock. Probably 3/4" more than your stock taco wheels.

 

Thanks

 

Here is the whole picture for you. You have 17 x 7.5 wheels with +30 offset. You are changing to either 17 x 7 or 17 x 7.5 with +15 offset. Using the same exact 265/65/17 tires the new 17 x 7 wheel will stick out 1/3" farther. The 17 x 7.5 +15 wheels would stick out 2/3" farther.

 

Need some input

I have 265/70/16 TrdPro wheels
I will be getting 4runner Pro wheels,
but not sure if I should wrap in 265/70/17 or 265/65/17
Goodyear Duratracs

 

Anyone know what wheel this is? Available locally, seller says 16" I would jump on them if I could find some info online.

 

Copied the picture and did an image search on google. Nothing came up close. Should be something inside the rim to narrow down what it is. Look at different brands to narrow down that center cap. That is a place to start.

 

Wasn't that a Texas regional special of some kind? I can't remember the details, but it looks like something that was on a dealer special.

 

I think you are correct. Someone recently had a set of these on CL locally off of a 2nd gen Texas Edition truck. I believe they were 17 x 9 because I considered buying them. Cannot recall the offset. Nope these were the Texas Edition wheels but these are the same center caps. Getting closer.

 

Sorry if this is covered earlier.....I just bought a 2017 Tacoma TRD Offroad. It came sporting 265 70 16 Goodyear Wranglers. Would I be able to put 265 75 16 tires on the stock rims without any trimming? I currently have no lift although that is planned in the future.

 

Yes you can! There are some nice stickies for max tire size etc. Heres a link - https://www.tacomaworld.com/threads...sizes-on-stock-suspension.67550/#post-1267711

 

Just found me 4 16" steelies off a 2
017 4x4 for $275 !Will mount some winter tires on them . Maybe even paint them up .Super White

 

Those are 17x8 can't remember the offset, I want to say +14? I have those I got them from TRD parts 4U, TSS/Texas edition, or gulf states Toyota, the ones I have were made by Ultra wheels, new they list at $204, in 2012 they were $214 a wheel. I've never seen the other one that was posted, I'm assuming the other wheel is also Ultra. I bought them because of the width, and the gray TRD beadlocks were exclusive to the TXBAJA at the time, or I would have bought TRD beadlocks at the time.

 

I have a 2007 prerunner with no plans for a lift. With that said, what would be required to install 17x9 rims? Also are 265s too narrow mount on said rim?
TIA

 

265's on a 17x9 rim should be fine.

 

Gulf States Toyota / TSS Wheels black. These came off a 2015 Tacoma. Posting what I know here in case it is helpful to anyone.
Two Part #'s on wheel:
00015-A1556-01 / 584-7883+18BGST
Diameter: 17"
Width: (actual) 9"
Offset :+18mm
Backspace: (according to calc) 4.7"
Sensors: PMV-108J
Weight: About 30lbs with a fish scale. I'll try to edit this once I get the proper weight.

Pictures:

 

You don't happen to have a weight for those do you?