1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Turn Signal Issue - Need help

Discussion in 'Lighting' started by NumberOne1One, Oct 8, 2017.

  1. Oct 8, 2017 at 8:56 AM
    #1
    NumberOne1One

    NumberOne1One [OP] New Member

    Joined:
    Oct 8, 2017
    Member:
    #232337
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2008 2.7 Regular Cab Tacoma
    Last weekend i started having issues during a road trip. My turn signals stopped working. Stopped and checked the fuse in the box under the hood and it was blown, so i changed it out. Fixed the problem for about a minute or two, then fuse blew again. Tried one more time later just to be sure, but yet again, fuse blew. So, after reading a bit i decided to buy a flasher relay to try that. Changed the relay and installed a fresh fuse. Worked for a couple minutes again then blew out another fuse. I just ordered a new turn signal switch to try that next. Anyone have any suggestions or have seen this problem before that could offer me some help?
    Thanks!
    2008 2.7 Regular Cab Tacoma
     
  2. Oct 8, 2017 at 10:16 AM
    #2
    Muddinfun

    Muddinfun Well-Known Member

    Joined:
    Apr 17, 2017
    Member:
    #216500
    Messages:
    7,491
    Poof.
     
    Last edited: Oct 11, 2017

Products Discussed in

To Top