What Have You Done To Your 3rd Gen Today?

wow man looks awesome , looks like they fit well to , how you pulling them

 

Any rubbing?

 

​

Tons ​

 

The truck pulls them great, I was surprised, if it wasn't for that 5 speed it would be crap LOL!

None, had my alignment slightly adjusted to accommodate the tires a little but no rubbing at all!

Back of the tires with the wheels cut, caster is about 2.4 degrees on both sides!

Back of the tire:




Front of the tire:

None!

 

looks great! ​

 

Thank god for @MidnightRebel07 and that cab mount chop!

 

Great !!

 

awesome man looks great , so awesome there fitting, man I wish I had half of your brain and half of @mesojdm brain my truck would be awesome

 

Still not totally tracking. Does this help?

I’ve also noticed that the side doors might be leaking :/
Heading out of town so don’t have time to run the problem down, but it will be sitting in the rain for the next few days so will find out when I return I guess.

 

Where did you buy this?

 

I have lockers front and rear, I've used them often over the years. I would put your first locker in rear. I use the rear far more frequently then locking both. TRD OR come with locker in rear.
Lock the rear, and if you find you use your rear locker and have occasions when you could have used the front, then when funds permit lock the front.

Honestly I have found most people...and this is just my observation, but most people never find the need to lock.
But if you "wheel" lock away!!!

 

That is probably one of the most useful mods I have made on my taco. I used it to mount a couple of fishing pole holders.

You can get that part at a local Toyota dealer, part#

$56 PT278-35100-BH Truck Bed Header Rail

PT278-35100-BH. I think the part was ~ $50. A word of caution when installing, if those torx bolts are still factory tightened, they will take some elbow grease to come off. The head can be easily stripped if you aren't careful. I believe you need a size 30.

 

Hey I have the same truck just in QS and want to do pretty much the same lift. I was wondering how the ride is since the 5100's? What's the change? Bad? Good? Thanks in advance.

 

He got it from camelback Toyota
This member works there
https://www.tacomaworld.com/threads/gunny-is-back.476544/

 

Love the ride especially with the OME 2886 coils now!

 

Filled up. Too often. Drove home to Alberta from South East Saskatchewan in heavy headwinds. Our client site recorded 122KMH winds overnight.

Normally getting about 15 MPG on the highway, was down to 10MPG for a good chunk of the trip home. A couple of semi trailers blown over in the ditch and watched one trailer's wheels lifting off the pavement as I approached him due to the cross winds. I snuck by him as quickly as I could.

 

SQUADRONS!

 

Updated. Installed. Thank goodness for their bezel. Minimizes the gap by a lot

 

I’m in love