295/75/16s fit with no rubbing with 2" lift

In case your wondering.. they fit no rubbing..have not done the body mount chop yet... The tire is a Toyo AT II Extreme Open Country. standard 2" lift Toytec Boss 2.5s with add a leaf in back. SPC UCAs.

They were on the wife's 100 series Landcruiser and I stole 'em.. She gets the 285/75/16 BFG TA KO2s.

The Toyos in this size measure out at 33.4 and the BFGs were 32.7, the Toyos are about .75 inch bigger in diameter and 11.6 wide also vs BFG 11.3.

I am going on a desert trip soon, so will report back on rubbing at articulation but I tested a bit already and no rubbing..

 

Cool
You’ll run when stuffed.

 

? you mean run from 295s when I stuff them? Have you run them on your truck?

 

I'm really surprised those don't rub.

 

285 70 17
And they rub a little on compressed turns...

 

Well, I am running SPC UCAs. Also, I was running 285s and they are 11.3 wide on an 8" rim, but my TRD rims are 7.5" wide so that must push the sidewall in a bit. The Toyos are 11.6" wide and my fingers still fit between the UCAs. The rubbing may come with articulation and stuffing, will see. Turning full right or left no rubbing.

 

What brand tire are you running? IF BFG those are 11.5 wide on an 8" wheel and 32.8" tall. If you had it aligned post tire install, they might have set the tire back to far, I think that is the Caster setting. Same thing happened to me, guy rolled out of the shop and turned the wheel at it rubbed with my 285/75/16s BFGs.. I was like hello, that is not gonna work.." so they adjusted the caster.. And it was a 4x4 shop.. So I was kind of pissed that they would not have tested, thought about articulation, etc..

Also I don't have factory lower front bumper plastic anymore.

Hope this helps.

 

Well back from the Maze District in Canyonlands, UT. Did a fair amount of wheeling in a short period of time. Lots of off camber with max turning and articulation. Minimal rubbing. On occasion I would rub, but nothing binding or hindering driving.

So I won't be doing a Body mount chop.

I will say these tires are a great fit with my set up, super glad I switched over to this size.

 

if you can stuff 295's under there, watch me try to stuff 305's next....

 

That would be cool, would depend on wheel size, tire size, UCAs, alignment, plus might have to do the body mount chop and bumper...

 

fuck it. you got me thinking about another money conversion. 315 Falken AT3w with TRD Pro Sema Wheels... cmc... yada yada..

 

hahaha..sorry bro... I know it is a slippery slope.. You toss on 315s and I am gonna be drooling and eventually follow.. damn this tire obsession...

 

i think the wheels help alot here. low offset and tucked in pretty good. surprised you aren't rubbing on UCAs tho

 

Yep, easy finger space back there. I have 1/8th spacers in the garage but did not use them.

 

One more good one!

 

I’m running spidertrax 1.25 inch spacers to make my stance more aggressive

 

The FJ wheel is about perfect for helping fit 285s/295s.
16x7.5/15mm offset/4-7/8" backspace.

 

thinking of using this fj wheel as well , with some toyo mt 255 85 16s

 

wow.. awesome pictures. I live in the northern midwest and kinda wishing I was out there instead