new head unit troubles for 2010 Taco

Need help installing a 5709 head unit into my 2010 Tacoma. It does have bluetooth built into it for voice calls only but I am now trying to install touch screen for backup camera display and music steaming. Is anyone able help on what (if any) harness I would need and how to reroute the camera feed to the head unit instead of the rear view mirror. Thank you for any help I receive.

 

You can tap into the rear camera circuit in the left lower part of the dash.


You will need the pins like this to tap it.


As far as where you will run it into the HU you will need a schematic of the pin out on it.

Here's the write up that tells more info.

https://www.tacomaworld.com/threads/oem-camera-connection-below-dash.30889/#post-476677

Try searching on here and there may have been someone who did this install. I believe I remember someone doing it.

 

What about the actual hook up of the head unit? Do you know what harness I'd need

 

My truck is a 2010 and I have upgraded to aftermarket head unit and added bluetooth steering wheel controls .
Have a look at my write up . There are many part numbers within my thread
https://www.tacomaworld.com/threads...ab-2010-with-pics-and-prices-write-up.364009/

 

Are you still trying to sell this?