Will 2016-2017 Tacoma TRD Off-Road Wheels Fit a _______?

Some dude bought mine and threw them on a Sequoia

 

Welp, now you have. I think they look pretty good on this color set.

 

Thread resurrection. Can anyone confirm if the 3rd gen 16" offroad wheels will fit around the stock brakes on a 2001 (3rd gen) 4runner?

 

Looks great man. So no issues fitting?

 

No issues, they bolt right up.

Just be sure to use the correct lug nuts for the wheels.

 

Any idea my stock '03 lug nuts will fit?

 

You want to make sure you're using alloy lugs for alloy wheels, steel lugs will chew the wheels up. If you buy the wheels then ask for the lugs also.

No idea what your 03 lugs are made of but the 3rd gen wheel lugs are the same thread pitch.

 

Got the new wheels and tires today, thanks for the help.

 

that looks really good, better than my son's gold truck!

 

Hey guys, just got on this forum and it seems dope i just got my first little truck its a 2003 Toyota Tacoma sr5 super clean! Any ways it has some ugly tiny wheels with chrome caps on them (disgusting) so i immediately bought some 2017 Toyo tacoma yrs wheels for cheap knowing i coukd resell them if they don't fit. I eould test fit them but they dont have air im just wondering if you guys know if it would fit everything is stock. Will provide pictures soon.

 

They fit fine.

 

That an 02?

I am trying to put these same rims on my 02 & they are telling me that the Lugs are the wrong size, what ones did you use?

 

Do you have a 4 wheel drive? I think the 2 wheel drives were 5 lug instead of 6.

 

Are you trying to buy new lugs or wondering if the lugs that come with the OEM OR wheels will fit? If it's the OEM wheel lugs they will fit a prerunner or 4X4 1st gen.

 

Mine is extended cab 4x4 it's not the sr5 or trd. Bolt pattern looks the same but the lugs from the 15 Inch tires apparently don't fit on the 16" tires off the 2017 trd offroad

 

Since I don't know what type of lug nut you have on your 1st gen you're going to need a flat seat alloy lug like the type shown here to work with the 3rd gen OR wheel.

 

Tire size is different but the "Wheels" will bolt right up if your truck has 6 Lugs.

 

Thanks Jason,

Apparently i had "acorn" style lugs on my old tires, these are definitely what I'm looking for. The only thing I couldn't get a straight answer out of the dealership on was whether I needed the longer or shorter stem for where you use the torque wrench.

 

They fit perfectly on my '98.

I have rubbing at absolute full steering lock but that's because I'm using much larger tires than stock (BFG KO2 LT265/75R16) I only notice it when you're turning sharp or parking.



BTW - The 3rd Gen Lug Nuts have the same thread pitch so they'll fit fine. I'm even using the 3rd Gen Wheel Locks. Difference between the wheels really is the back spacing. I'm also running AISIN Manual Hubs and Tundra 13WL Calipers and they both clear no issue.