Installing URD fuel pump. Need second opinion

Currently installing the URD fuel pump setup in my Tacoma. Does this look right to the people that have done it? I know there are some issues with the hose being too much in a bind from the clamps ?

 

i dont like the looks of that kink there. if it was me what id do is take a pc of that hose down to home depot and get a stainless steel spring that will fit inside it. that will keep it from doing that. used this trick on many motorcycles. has to be stainless carbon steel may rust over time.

 

URD doesn't supply the proper hose??

 

Nope that's what URD supplies... I rolled the hose around and got the kink to be a little less. Trucks running good so far ‍♂️

 

I expect better of URD. I would not accept it. It requires a formed hose. The spring solution that was mentioned above should work too, but it is not your place to go hunting for a solution. bear in mind that the hose could continue to collapse over time and strangle your fuel flow,...the very reason you got the new pump to begin with. It's just my opinion,...I'm calling bullshit, and I would have them on the phone.

 

For anyone doing this URD fuel pump upgrade, the fuel tube discussed in this thread is probably the better way to go. Hope this helps helps someone out in the future. Wish i would've stumbled on that earlier...


https://www.tacomaworld.com/threads/improving-the-urd-fuel-pump-kit.308651/