Tire size

Trying to see what tire size to go with, can anybody shed some light? I’m going with a leveling/lift kit 3” in the front and 2” in the rear. Would a 285/75r16 fit on the stock trd off-road rym and would the tire rub ?

 

There are million threads on this topic, as it gets asked every day on this Forum. Look through this thread and research research research.

https://www.tacomaworld.com/threads...2016-tacoma-presented-by-toytec-lifts.395798/

 

The tires will fit on the wheel, but you MAY need to run some wheel spacers for those tires to fit without rubbing. A lot will also depend on the type of tire that you are going to use. An M/T or an A/T could have different widths and height depending on the manufacturer.

http://www.spidertrax.com/products/2001-Up-Tacoma-Pre-Runner-4WD

If you are looking at getting a 33" tire; you may also look into the LT255/85R16. There is a good thread about that here on TW, this thread is more to do with that size tire on stock suspension and OEM wheels.

https://www.tacomaworld.com/threads/put-255-85-16s-on-stock-or-wheels-and-suspension.491079/

Good luck OP, looking forward to seeing what you end up doing.

Edit: I would much rather run that size tire (285/75R16) on an 8" wide aftermarket wheel. Now, if you were to run the 255/85R16 tire, that would fit nicely on the OEM wheels. Just my $.02